相关论文: On the Capacity of MIMO Broadband Power Line Commu…

Power line communications (PLC) is the central communications technology for the realization of smart power grids. As the designated band for smart grid communications is the narrowband (NB) power line channel, NB-PLC has been receiving…

Narrowband power line communication (NB-PLC) systems are an attractive solution for supporting current and future smart grids. A technology proposed to enhance data rate in NB-PLC is multiple-input multiple-output (MIMO) transmission over…

Understanding the interference scenario in power lines network is a key step to characterize the power line communication (PLC) system. This paper focuses on the characterization and modelling of the stationary noise in Narrowband PLC.…

Noise modeling in power line communications has recently drawn the attention of researchers. However, when characterizing the noise process in narrowband communications, previous works have only focused on small-scale phenomena involving…

We investigate the Peak-Power Limited (PPL) Additive White Gaussian Noise (AWGN) channels in which the signal is band-limited, and its instantaneous power cannot exceed the power P. This model is relevant to many communication systems;…

This paper focuses on the parameterization of the multipath propagation model (MPM) for indoor broadband power line communications (PLC), which up to now has been established in an heuristic way. The MPM model was initially proposed in the…

This paper studies the performance of block coding on an additive white Gaussian noise channel under different power limitations at the transmitter. Lower bounds are presented for the minimum error probability of codes satisfying maximal…

In recent decades, power line communication has attracted considerable attention from the research community and industry, as well as from regulatory and standardization bodies. In this article we provide an overview of both narrowband and…

We study the communication capacities of bosonic broadband channels in the presence of different sources of noise. In particular we analyze lossy channels in presence of white noise and thermal bath. In this context, we provide a numerical…

Although power line communication (PLC) systems are available everywhere, unfortunately these systems are not suitable for information transmission due to the effects of the impulsive noise. Therefore, many previous studies on channel codes…

Power line communication (PLC) provides intelligent electrical functions such as power quality measurement, fault surveys, and remote control of electrical network. However, most of research works have been done in low voltage (LV) scenario…

The quantum capacity of a noisy quantum channel determines the maximal rate at which we can code reliably over asymptotically many uses of the channel, and it characterizes the channel's ultimate ability to transmit quantum information…

This paper considers Electromagnetic Compatibility (EMC) aspects in the context of Power Line Communication (PLC) systems. It offers a complete overview of both narrow band PLC and broad band PLC EMC norms. How to interpret and translate…

The huge and increasing demand of data connectivity motivates the development of new and effective power line communication (PLC) channel models, which are able to faithfully describe a real communication scenario. This is of fundamental…

We give analytic upper bounds to the channel capacity C for transmission of classical information in electromagnetic channels (bosonic channels with thermal noise). In the practically relevant regimes of high noise and low transmissivity,…

We determine lower and upper bounds on the capacity of bandlimited optical intensity channels (BLOIC) with white Gaussian noise. Three types of input power constraints are considered: 1) only an average power constraint, 2) only a peak…

In this paper, we study a dual-hop mixed power line communication and radio-frequency communication (PLC/RF) system, where the connection between the PLC link and the RF link is made by a decode-and-forward (DF) or amplify-and-forward (AF)…

The multiple-input and multiple-output (MIMO) technique is regarded as a promising approach to boost the throughput and reliability of optical fiber communications. However, the fundamental limits of optical fiber MIMO systems with finite…

The maximum rates for information transmission through noisy quantum channels has primarily been developed for memoryless channels, where the noise on each transmitted state is treated as independent. Many real world communication channels…

In pursuit of enhanced quality of service and higher transmission rates, communication within the mid-band spectrum, such as bands in the 6-15 GHz range, combined with extra large-scale multiple-input multiple-output (XL-MIMO), is…