相关论文: IEEE 802.11ay based mmWave WLANs: Design Challenge…
The future wireless communication system faces the bottleneck of the shortage of traditional spectrum resources and the explosive growth of the demand for wireless services. Millimeter-wave communication with spectral resources has become…
Millimeter wave (mmWave) communications have been postulated as one of the most disruptive technologies for future 5G systems. Among mmWave bands the 60-GHz radio technology is specially suited for ultradense small cells and mobile data…
Mobility scenarios involving short contact times pose a challenge for high bandwidth data transfer between autonomous vehicles and roadside base stations (BS). Millimeter wave bands are a viable solution as they offer enormous bandwidth in…
Next-generation wireless networks must enable emerging technologies such as augmented reality and connected autonomous vehicles via wide range of wireless services that span enhanced mobile broadband (eMBB), as well as ultra-reliable…
Communicating on millimeter wave (mmWave) bands is ushering in a new epoch of mobile communication which provides the availability of 10 Gbps high data rate transmission. However, mmWave links are easily prone to short transmission range…
Rapid beam alignment is required to support high gain millimeter wave (mmW) communication links between a base station (BS) and mobile users (MU). The standard IEEE 802.11ad protocol enables beam alignment at the BS and MU through a lengthy…
IEEE 802.11 and IEEE 802.15.3 are wireless standards originally designed for wireless local area network (WLAN) and wireless personal area network (WPAN). This paper studies MAC throughput analysis of both standards. We present a…
Millimeter Wave (mm-w), especially the 60 GHz band, has been receiving much attention as a key enabler for the 5G cellular networks. Beamforming (BF) is tremendously used with mm-w transmissions to enhance the link quality and overcome the…
As low frequency band becomes more and more crowded, millimeter-wave (mmWave) has attracted significant attention recently. IEEE has released the 802.11ad standard to satisfy the demand of ultra-high-speed communication. It adopts…
The IEEE 802.11ad standard extends WiFi operation to the millimeter wave frequencies, and introduces novel features concerning both the physical (PHY) and Medium Access Control (MAC) layers. However, while there are extensive research…
Wireless networks have become the main form of Internet access. Statistics show that the global mobile Internet penetration should exceed 70\% until 2019. Wi-Fi is an important player in this change. Founded on IEEE 802.11, this technology…
The IMT 2020 requirements of 20 Gbps peak data rate and 1 millisecond latency present significant engineering challenges for the design of 5G cellular systems. Use of the millimeter wave (mmWave) bands above 10 GHz --- where vast quantities…
WiFi was designed just to replace the wired connections, but it has changed the Internet as a whole. WiFi users are increasing day by day and the traffic from wireless devices is dominating the Internet. With an increasing number of users…
Although millimeter wave (mmWave) systems promise to offer larger bandwidth and unprecedented peak data rates, their practical implementation faces several hardware challenges compared to sub-6 GHz communication systems. These hardware…
This paper provides an overview of the features of fifth generation (5G) wireless communication systems now being developed for use in the millimeter wave (mmWave) frequency bands. Early results and key concepts of 5G networks are…
With the standardization of 5G, commercial millimeter wave (mmWave) communications has become a reality despite all the concerns about the unfavorable propagation characteristics of these frequencies. Even though the 5G systems are still…
The millimeter wave (mmWave) frequencies offer the potential of orders of magnitude increases in capacity for next-generation cellular wireless systems. However, links in mmWave networks are highly susceptible to blocking and may suffer…
The development of integrated sensing and communication (ISAC) systems has recently gained interest for its ability to offer a variety of services including resources sharing and new applications, for example, localization, tracking, and…
The most essential part of Internet of Things (IoT) infrastructure is the wireless communication system that acts as a bridge for the delivery of data and control messages. However, the existing wireless technologies lack the ability to…
The wireless communications landscape is anticipated to offer new service levels following the introduction of the millimeter-wave (mmWave) spectrum to consumer electronics. With their broad bandwidths and corresponding multi-Gbps data…