相关论文: Low Temperature Ageing Behaviour of U-Nb $\alpha''…

Ageing mechanisms of the U-7\%wtNb alloy have been investigated on samples exposed to temperatures of 150$^{o}$C for up to 5000\,hours. A variety of surface and bulk analytic techniques have been used to investigate microstructural,…

This study examines the phase transitions occurring during linear heating of the Zr15Nb alloy through a comprehensive, multi-technique methodology comprising in-situ high-energy synchrotron X-ray diffraction (HEXRD), electrical resistance…

Further development of nuclear power plant technology relies heavily on materials durability under operating conditions. Estimating the materials performance in the operando tests is crucial. In this paper, the mechanical behavior of thin…

The brittleness of an aluminide diffusion coating protecting a Ren\'e 125 Ni-based polycrystalline superalloy was investigated over a wide range of temperatures in its as-received and thermally aged form. Isothermal and thermal cycled aging…

The mechanical properties and microstructural evolution of a medium-entropy alloy Co$_{17.5}$Cr$_{12.5}$Fe$_{55}$Ni$_{10}$Mo$_{5}$ (at%) in a low temperature range (including the record low temperatures region down to 0.5 K) were…

We report the observation of magnetic and resistive aging in a self assembled nanoparticle system produced in a multilayer Co/Sb sandwich. The aging decays are characterized by an initial slow decay followed by a more rapid decay in both…

The recent suggestion that dramatic changes may occur in the lifetime of alpha and beta decay when the activity, in a pure metal host, is cooled to a few Kelvin, is examined in the light of published low temperature nuclear orientation…

In this study Mo-Nb-Ta-W refractory high-entropy alloys (R-HEAs) have been studied for their phase stability for a wide temperature range (100 K to 2000 K). The equilibrium thermodynamic phases are determined by the changes in enthalpy and…

The mechanical properties of Cu/Nb metallic nanolaminates with different layer thickness (7, 16, 34 and 63 nm) were studied by means of micropillar compression tests from room temperature to 400 C. Both strain-rate jump and constant strain…

Additive manufacturing of Ti-6Al-4V alloy via laser powder-bed fusion leads to non-equilibrium $\alpha'$ martensitic microstructures, with high strength but poor ductility and toughness. These properties may be modified by heat treatments,…

Ordered intermetallics are long believed to be the final products of the aging of U-Nb solid solutions at low temperatures, a crucial property for the practical applications of this alloy in engineering and industry. However, such…

We report the results of the Ni-based bulk metallic glass structural evolution and crystallization behavior in situ investigation. The X-ray diffraction (XRD), transmission electron microscopy (TEM), nano-beam diffraction (NBD),…

In this study atom probe tomography was used to investigate the microstructure of AA2198 (Al-1.35Cu-3.55Li-0.29Mg-0.08Ag) over a range of ageing conditions to examine the evolution of phases in the alloy, in particular aiming to reveal the…

In this paper, we present temperature and field dependent neutron diffraction (ND) study to unravel the structural and the magnetic properties in Ni50Mn38Sb12 Heusler system. This alloy shows martensitic transition from high temperature…

The evolution of the nuclear and magnetic structures of TlFe$_{1.6}$Se$_2$ was determined in the temperature range of 5-450\,K using single crystal neutron diffraction. The Fe layers in these materials develop a corrugation in the…

We present magnetic, thermodynamic, dielectric and structural investigations on the aluminoborate Ni${_2}$AlBO${_5}$, belonging to the ludwigite family. Room temperature structural refinement suggests that the system crystallizes in the…

Phase-change materials based on Ge-Sb-Te alloys are widely used in industrial applications such as nonvolatile memories, but reaction pathways for crystalline-to-amorphous phase-change on picosecond timescales remain unknown. Femtosecond…

A 10 wt.% nickel-steel has been developed for high pressures and low-temperature applications, due to its high strength, excellent toughness, and low ductile-to-brittle transition temperature (DBTT). Under dynamic loading conditions this…

The temperature dependent crystal structure analysis in martensitic phase of Ni_2Mn_(1+x)Sn_(1-x) (x = 0.40 and 0.44) magnetic shape memory alloy is performed using X-ray diffraction. The martensitic phase consists of 4-Layered and…

In search for the origins of the extraordinary low twinning stress of Ni-Mn-Ga magnetic shape memory alloys we studied the thermally induced changes of structure in Ni$_{50}$Mn$_{25+x}$Ga$_{25-x}$ ($x$=2.7--3.9) single crystal samples and…