相关论文: Note on the reflectance of mirrors exposed to a st…
A bent-crystal mirror has been used to focus an atomic helium beam. The mirror is made from gold deposited onto a mica substrate to form a thin film (~5000 {\AA} thick) of large single crystal domains (domain size ~4000 {\AA} ). The mica…
Silver is a metal which provides the highest reflectivity in the very broad wavelength range as well as the lowest polarization splitting. However, it is not very stable chemically and silver mirrors are easily damaged in a corrosive or…
Motivated by a recent experiment [J. Eschner {\it et al.}, Nature {\bf 413}, 495 (2001)], we now present a theoretical study on the fluorescence of an atom in front of a mirror. On the assumption that the presence of the distant mirror and…
A high-flux source of strontium atoms is required for cold atom quantum technology applications. We present a re-entrant oven design that avoids the need for any vacuum feed-throughs and has an inherent temperature gradient to guard against…
We report on the atom optical manipulation of an atom laser beam. Reflection, focusing and its storage in a resonator are demonstrated. Precise and versatile mechanical control over an atom laser beam propagating in an inhomogeneous…
A continuous guided atomic beam of $^{88}\mathrm{Sr}$ with a phase-space density exceeding $10^{-4}$ in the moving frame and a flux of $3 \times 10^{7} \, \mathrm{at \, s^{-1}}$ is demonstrated. This phase-space density is around three…
An ideal solid-state supermirror (SM) neutron polarizer assumes total reflection of neutrons from the SM coating for one spin-component and total absorption for the other, thus providing a perfectly polarized neutron beam at the exit.…
In front of a mirror, the radiation of weakly driven large disordered clouds presents an interference fringe in the backward direction, on top of an incoherent background. Although strongly driven atoms usually present little coherent…
In a recent experiment, the out-of-plane surface susceptibility of a single-layer two-dimensional atom crystal in the visible spectrum has been measured. This susceptibility gives a measurable contribution to the reflectivity of…
We report on the realization of a transversely loaded two-dimensional magneto-optical trap serving as a source for cold strontium atoms. We analyze the dependence of the source's properties on various parameters, in particular the intensity…
We show that thin dielectric films can be used to enhance the performance of passive atomic mirrors by enabling quantum reflection probabilities of over 90% for atoms incident at velocities ~1 mm/s, achieved in recent experiments. This…
In low energy atom-surface scattering, it is possible for the atom to be reflected in a region of attractive potential with no classical turning point. This phenomenon has come to be known as quantum reflection and it can reduce the…
A laser ablation system has been constructed and used to determine the damage threshold of stainless steel, rhodium and single-, poly- and nanocrystalline molybdenum in vacuum, at a number of wavelengths between 220 and 1064 nm using 5 ns…
We describe the fabrication of an atom mirror by etching of a common hard drive, and we report the observation of specular retroreflection of 11 uk cesium atoms using this mirror. The atoms were trapped and cooled above the hard drive using…
A theory of evanescent mode atomic mirrors utilising a metallic sheet on a dielectric substrate is described. The emphasis here is on the role of the metallic sheet and on the evaluation of atomic trajectories using the field- dipole…
The reflection of an optical wave from a metal, arising from strong interactions between the optical electric field and the free carriers of the metal, is accompanied by a phase reversal of the reflected electric field. A far less common…
We describe an experimental apparatus capable of achieving a high loading rate of strontium atoms in a magneto-optical trap operating in a high vacuum environment. A key innovation of this setup is a two dimensional magneto-optical trap…
Dielectric mirrors comprising thin-film multilayers are widely used in optical experiments because they can achieve substantially higher reflectance compared to metal mirrors. Here we investigate potential problems that can arise when…
High-power lasers have numerous scientific and industrial applications. Some key areas include laser cutting and welding in manufacturing, directed energy in fusion reactors or defense applications, laser surgery in medicine, and advanced…
We have observed laser-like emission of surface plasmon polaritons (SPPs) decoupled to the glass prism in an attenuated total reflection setup. SPPs were excited by optically pumped molecules in a polymeric film deposited on the top of the…