相关论文: Triggering flow asymmetry by lamella deflection du…

When a liquid drop impacts on a heated substrate, it can remain deposited, or violently boil in contact, or lift off with or without ever touching the surface. The latter is known as the Leidenfrost effect. The duration and area of the…

The impact dynamics of spinning droplets onto superhydrophobic surfaces was studied by using Volume-of-Fluid simulations, covering broad ranges of Weber number ($We$) and dimensionless angular velocity ($\mathit{\Omega}$). The omputational…

We present fluid dynamics videos illustrating wetting splashing-produced by water drop impact onto hydrophobic microstructures at high impact velocity ($\sim 3$ ms$^{-1}$). The substrate consists of regular and transparent microtextures in…

We consider the equilibrium behaviour and dynamics of liquid drops on a superhydrophobic surface patterned with sawtooth ridges or posts. Due to the anisotropic geometry of the surface patterning, the contact line can preferentially depin…

Drop impacts on solid and liquid surfaces exhibit complex dynamics due to the competition of inertial, viscous, and capillary forces. After impact, a liquid lamella develops and expands radially, and under certain conditions, the outer rim…

The impact of liquid drops on solid surfaces is ubiquitous in nature, and of practical importance in many industrial processes. A drop hitting a flat surface retains a circular symmetry throughout the impact process. Here we show that a…

Rigid superhydrophobic materials have the ability to repel millimetric water drops, in typically 10 ms. Yet, most natural water-repellent materials can be deformed by impacting drops. To test the effect of deformability, we perform impacts…

We study experimentally the enhancement of splashing due to solidification. Investigating the impact of water drops on dry smooth surfaces, we show that the transition velocity to splash can be drastically reduced by cooling the surface…

Droplets at the air-liquid interface of immiscible liquids usually form partially-submerged lens shapes (e.g. water on oil). In addition to this structure, we showed that droplets released from critical heights above the target liquid can…

We study the impact and subsequent retraction dynamics of liquid droplets upon high-speed impact on hydrophobic surfaces. Performing extensive experiments, we show that the drop retraction rate is a material constant and does not depend on…

Superrepellency is a favorable non-wetting situation featured by a dramatically reduced solid/liquid contact region with extremely low adhesion. However, drop impact often brings out a notable extension of the contact region associated with…

We study the effect of shear flow on the entropic Helfrich interaction in lyotropic surfactant smectic fluids. Arguing that flow induces an effective anisotropic surface tension in bilayers due to a combination of intermonolayer friction,…

In this paper we study the morphology of drops formed on partially wetting substrates, whose footprint is not circular. This type of drops is a consequence of the breakup processes occurring in thin films when anisotropic contact line…

Interfaces between a water droplet and a network of pillars produce eventually superhydrophobic, self-cleaning properties. Considering the surface fraction of the surface in interaction with water, it is possible to tune precisely the…

Ambient air cushions the impact of drops on solid substrates, an effect usually revealed by the entrainment of a bubble, trapped as the air squeezed under the drop drains and liquid-solid contact occurs. The presence of air becomes evident…

The dynamics of drop impact on solid surfaces can be changed significantly by tuning the elasticity of the solid. Most prominently, the substrate deformation causes an increase in the splashing threshold as compared to impact onto perfectly…

When a droplet gently lands on an atomically smooth substrate, it will most likely contact the underlying surface in about 0.1 s. However, theoretical estimation from fluid mechanics predicts a contact time of 10 to 100 s. What causes this…

We study the influence of the surrounding gas in the dynamics of drop impact on a smooth surface. We use an axisymmetric 3D model for which both the gas and the liquid are incompressible; lubrication regime applies for the gas film dynamics…

Water drops sliding on hydrophobic surfaces spontaneously separate charges at their rear. It is unclear how this charge separation affects the contact angles of a sliding drop. We slide grounded and insulated drops on hydrophobic surfaces…

Colliding drops are widely encountered in everyday technologies and natural processes, from combustion engines and commodity sprays to raindrops and cloud formation. The outcome of a collision depends on many factors, including the impact…