相关论文: Application of Pareto-efficient combustion modelin…
The simulation of turbulent combustion phenomena is still an open problem in modern fluid dynamics. Considering the economical importance of hydrocarbon combustion in energy production processes, it is evident the need of an accurate tool…
A new computational methodology, termed "PeleLM-FDF" is developed and utilized for high fidelity large eddy simulation (LES) of complex turbulent combustion systems. This methodology is constructed via a hybrid scheme combining the Eulerian…
A purely data-driven approach using deep convolutional neural networks is discussed in the context of Large Eddy Simulation (LES) of turbulent premixed flames. The assessment of the method is conducted a priori using direct numerical…
An extension to the classical FPV model is developed for transcritical real-fluid combustion simulations in the context of finite volume, fully compressible, explicit solvers. A double-flux model is developed for transcritical flows to…
Large-eddy simulations (LES) of a planar turbulent lean hydrogen-air jet flame at Re = 11000 are performed using a tabulated flamelet model based on mixture-averaged diffusion that incorporates detailed transport, including differential and…
Complete computation of turbulent combustion flow involves two separate steps: mapping reaction kinetics to low-dimensional manifolds and looking-up this approximate manifold during CFD run-time to estimate the thermo-chemical state…
Parameter extension simulation (PES) as a mathematical method for simulating turbulent flows has been proposed in the study. It is defined as a calculation of the turbulent flow for the desired parameter values with the help of a reference…
Numerical modeling of turbulent spray combustion provides a promising tool for advanced engine design. In spray flames, the droplet evaporation not only reduces the ambient gas temperature, but also influences flame structure by generating…
Liquid ammonia combustion can be enhanced by co-firing with small molecular fuels such as methane, and liquid ammonia will undergo flash evaporation due to its relatively low saturation pressure. These characteristics, involving the…
With increasing emphasis on carbon neutrality, accurate and efficient combustion prediction has become essential for the design and optimization of new generation combustion systems. This study established a computational framework by…
A turbulent side-wall quenching (SWQ) flame in a fully developed channel flow is studied using Large-Eddy Simulation (LES) with a tabulated chemistry approach. Three different flamelet manifolds with increasing levels of complexity are…
A new methodology based on energy flux similarity is suggested in this paper for large eddy simulation (LES) of transitional and turbulent flows. Existing knowledge reveals that the energy cascade generally exists in transitional and…
A Thickened Flame (TF) modeling approach is combined with a Large Eddy Simulation (LES) methodology to model premixed combustion and the accuracy of these model predictions is evaluated by comparing with the piloted premixed stoichiometric…
This work presents a numerical study of a diffusion flame in a reacting, two-dimensional, turbulent, viscous, multi-component, compressible mixing layer subject to a large favorable streamwise pressure gradient. The boundary-layer equations…
In this paper we propose a new modeling framework for large eddy simulations (LES) of particle-laden turbulent flows that captures the interaction between the particle and fluid phase on both the resolved and subgrid-scales. Unlike the vast…
Large eddy simulation (LES) has become the de-facto computational tool for modeling complex reacting flows, especially in gas turbine applications. However, readily usable general-purpose LES codes for complex geometries are typically…
This study performs a linear analysis of a turbulent reacting methane-air jet flame, with the goal of predicting the response of the reacting flow to upstream acoustic actuation. Accounting for heat release fluctuations is a vital component…
We present a numerical method for Large Eddy Simulations (LES) of compressible two-phase flows. The method is validated for the flow in a micro channel with a step-like restriction. This setup is representative for typical cavitating…
Large eddy simulation of propane/air jet flame in the wrinkled flamelets regime of the Borghi diagram is used to assess the performance of a recently developed consumption speed correction model in premixed combustion. The combustion is…
This study explores the integration of machine learning (ML) techniques with large eddy simulation (LES) for predicting species mass fraction and flame characteristics in partially premixed turbulent jet flames. The LES simulations,…