相关论文: Few-mode fibers and AO-assisted high resolution sp…
NIRPS (Near Infra-Red Planet Searcher) is an AO-assisted and fiber-fed spectrograph for high precision radial velocity measurements in the YJH-bands. NIRPS also has the specificity to be an SCAO assisted instrument, enabling the use of…
NIRPS (Near Infra-Red Planet Searcher) is an AO-assisted and fiber-fed spectrograph for high precision radial velocity measurements in the YJH-bands. NIRPS also has the specificity to be an SCAO assisted instrument, enabling the use of…
The Near-InfraRed Planet Searcher (NIRPS) is a high-resolution, high-stability near-infrared (NIR) spectrograph equipped with an AO system. Installed on the ESO 3.6-m telescope, it was developed to enable radial velocity (RV) measurements…
Radial velocity instruments require high spectral resolution and extreme thermo-mecanical stability, even more difficult to achieve in near-infra red (NIR) where the spectrograph has to be cooled down. For a seeing-limited spectrograph, the…
Modal noise in fibers has been shown to limit the signal-to-noise ratio achievable in fiber-coupled, high-resolution spectrographs if it is not mitigated via modal scrambling techniques. Modal noise become significantly more important as…
The Near-Infrared Imager and Slitless Spectrograph (NIRISS) is the science module of the Canadian-built Fine Guidance Sensor (FGS) onboard the James Webb Space Telescope (JWST). NIRISS has four observing modes: 1) broadband imaging…
Modal noise in optical fibers imposes limits on the signal to noise and velocity precision achievable with the next generation of astronomical spectrographs. This is an increasingly pressing problem for precision radial velocity (RV)…
Optical fiber modal noise is a limiting factor for high precision spectroscopy signal-to-noise in the near-infrared and visible. Unabated, especially when using highly coherent light sources for wavelength calibration, modal noise can…
We compare performances of ground-based single-mode and multimode (speckle) interferometers in the presence of partial Adaptive Optics correction of atmospheric turbulence. It is first shown that for compact sources (i.e. sources smaller…
The Near-InfraRed Planet Searcher or NIRPS is a precision radial velocity spectrograph developed through collaborative efforts among laboratories in Switzerland, Canada, Brazil, France, Portugal and Spain. NIRPS extends to the 0.98-1.8…
The Near Infrared Imager and Slitless Spectrograph instrument (NIRISS) is the Canadian Space Agency (CSA) contribution to the suite of four science instruments of JWST. As one of the three NIRISS observing modes, the Single Object Slitless…
Exploring the use of single-mode fibers (SMFs) in high precision Doppler spectrometers has become increasingly attractive since the advent of diffraction-limited adaptive optics systems on large-aperture telescopes. Spectrometers fed with…
Context: The NIRSpec instrument for the James Webb Space Telescope (JWST) can be operated in multiobject (MOS), long-slit, and integral field (IFU) mode with spectral resolutions from 100 to 2700. Its MOS mode uses about a quarter of a…
Starting from our puzzling on-sky experience with the GIANO-TNG spectrometer we set up an infrared high resolution spectrometer in our laboratory and used this instrument to characterize the modal noise generated in fibers of different…
Adaptive optics (AO) systems are crucial for high-resolution astronomical observations by compensating for atmospheric turbulence. While laser guide stars (LGS) address high-order wavefront aberrations, natural guide stars (NGS) remain…
Fiber modal noise is a performance limiting factor in high-resolution spectroscopy, both with respect to achieving high signal-to-noise ratios or when targeting high-precision radial velocity measurements, with multi-mode fiber-fed…
The Near-Infrared Spectrograph (NIRSpec) is one of the four focal plane instruments on the James Webb Space Telescope. In this paper, we summarize the in-orbit performance of NIRSpec, as derived from data collected during its commissioning…
Fiber modal noise is a performance limiting factor in high-precision radial velocity measurements with multi-mode fiber-fed high-resolution spectrographs. Traditionally, modal noise is mitigated by agitating the fiber, this way…
A near-infrared (NIR) measurement based on digital orthogonal vector lock-in amplifier (LIA) is present in this paper. NIR sky background radiation is very weak. To detect the signals obscured by noise, the best way achieved is to use a…
We describe a new system for multiple object spectroscopy and integral field spectroscopy at near-infrared wavelengths using optical fibers. Both modes of the SMIRFS instrument have been tested at the UK Infrared Telescope with the CGS4…