相关论文: Ordered FePdCu nanoisland arrays made by templated…
We demonstrate control of magnetic domain structures in continuous FePd thin films by patterning their surfaces with plasma treatment. The Fe-oxide layer formed on the surface upon ambient exposure of the FePd alloy thin film grown on an…
The fabrication of more and more miniaturized electronic and photonic devices relies on new, ingenious methods for the fabrication of spatially controlled nanostructures. Examples are electronic devices based on semiconducting nanowires and…
The properties of alloys that undergo to chemical order-disorder transformations depend heavily on the degree of ordering in the crystal lattice. In the literature, it is well established that the ordering in a magnetic alloy such as…
Strongly correlated ground states and exotic quasiparticle excitations in low-dimensional systems are central research topics in the solid state research community. The present work develops a new layered material and explores the physical…
The decomposition process mechanisms have been investigated in a Fe50Au25Pd25 (at.%) alloy processed by severe plastic deformation. Phases were characterized by X-ray diffraction and microstructures were observed using transmission electron…
It is widely accepted that self-assembling building blocks is one of the promising ways for engineering new materials. Recent years reveal substantial progress in fabricating colloidal particles, polymer blocks and supramolecular aggregates…
Au-Cu bimetallic nanoparticles (NPs) grown on TiO 2 (110) have been followed in-situ using grazing incidence x-ray diffraction and x-ray photoemission spectroscopy from their synthesis to their exposure to a CO/O 2 mixture at low pressure…
We report the synthesis of Co2FeGa/SiO2 nanoparticles by sol-gel method and characterization using x-ray diffraction (XRD), transmission electron microscopy (TEM) and magnetic measurements. The Rietveld refinements of XRD data with space…
We report an experimental and computational study of magnetic and electronic properties of the layered Ru(V) oxide SrRu2O6 (hexagonal, P-3 1m), which shows antiferromagnetic order with a N\'eel temperature of 563(2) K, among the highest for…
Nanocrystals of indium oxide (In$_2$O$_3$) with sizes below 10 nm were prepared in alumina matrixes by using a co-pulverization method. The used substrates such as borosilicate glasses or (100) silicon as well as the substrate temperatures…
The objective of this work is to study the magnetic properties of arrays of Ni-Fe nanowires electrodeposited in different template materials such as porous silicon, polycarbonate and alumina. Magnetic properties were studied as a function…
Bimetallic nanoparticles are often superior candidates for a wide range of technological and biomedical applications, thanks to their enhanced catalytic, optical, and magnetic properties, which are often better than their monometallic…
Oxide based diluted magnetic semiconductor (DMS) materials have been a subject of increasing interest due to reports of room temperature ferromagnetism in several systems and their potential use in the development of spintronic devices.…
Surface diffusion has an impact on the lateral resolution of nanostructures in bottom-up atom nanofabrication. In this paper we study the effects of the gallium atoms self-assembled on silicon surfaces (100) patterned with trenches at…
The mechanical behaviour and deformation mechanisms of magnetron-sputtered Zr/Nb nanoscale multilayers were analysed as a function of the periodicity (L = 10 and 75 nm) and annealing time at 350C (2-336 hrs). The strength of the…
Two-dimensional (2D) magnets with intrinsic ferromagnetic/antiferromagnetic (FM/AFM) ordering are highly desirable for future spintronics devices. However, the synthesis of 2D magnetic crystals, especially the direct growth on SiO2/Si…
The present work illustrates a novel approach for the maskless and resistless fabrication of nanopatterned metal layers on Si substrates, based on the combination of nanomechanical surface modification techniques (such as nanoindentation…
Sub-100 nm polymeric spherical plano-convex nano-lens arrays are fabricated using short electron beam exposures to selectively modify the ultrathin (< 30 nm) polymer films, followed by their intensified self-organized dewetting under an…
Dry synthesis is a highly versatile method for the fabrication of nanoporous metal films, since it enables easy and reproducible deposition of single or multi-layer(s) of nanostructured materials that can find intriguing applications in…
Bulk samples of carbon multilayer nanotubes with the structure of nested cones (fishbone structure) suitable for transport measurements, were prepared by compressing under high pressure (~25 kbar) a nanotube precursor synthesized through…