相关论文: Microstructure-based fatigue life model of metalli…

A microstructure-based model that accounts for the effect of grain size has been developed to study the effect of grain size on the fatigue life of Inconel 718 alloys. The fatigue behavior of two alloys with different grain size was…

In this paper, two fatigue lifetime prediction models are tested on TiAl intermetallic using results from uniaxial low-cycle fatigue tests. Both assessments are based on dissipated energy but one of them considers a hydrostatic pressure…

Crack initiation governs high cycle fatigue life and is susceptible to microstructural details. While corresponding microstructure-sensitive models are available, their validation is difficult. We propose a validation framework where a…

The microstructural characteristics of a single crystalline nickel based superalloy (AM1) tested under high temperature fatigue at 950$^\circ$C are reported. For repeated fatigue (R$_\varepsilon$=0) through a range of cycle numbers N with…

Strain-controlled fatigue of Mg-1Mn-0.5Nd (wt.\%) alloy were studied by experiment and simulation. The microstructure was made up of a dispersion of strongly texture grains (13\%) embedded in a matrix of grains with a random texture. The…

A multi-scale methodology is developed in conjunction with a probabilistic fatigue lifetime model for structures with pores whose exact distribution, i.e. geometries and locations, is unknown. The method takes into account uncertainty in…

This paper describes a two-dimensional (2D) finite element simulation for fracture and fatigue behaviours of pure alumina microstructures such as those found at hip prostheses. Finite element models are developed using actual Al2O3…

Fatigue life of components or test specimens often exhibit a significant scatter. Furthermore, size effects have a non-negligible influence on fatigue life of parts with different geometries. We present a new probabilistic model for…

Purpose - The purpose of this paper is to describe finite element modelling for fracture and fatigue behaviour of zirconia toughened alumina microstructures. Design/methodology/approach - A two-dimensional finite element model is developed…

A microstructure-sensitive fatigue life prediction framework based on CP-FFT is proposed to study SLM fabricated Hastelloy-X. The microstructure enters in the model through the shape, size and orientation distributions of grains in the…

In the present study, a general probabilistic design framework is developed for cyclic fatigue life prediction of metallic hardware using methods that address uncertainty in experimental data and computational model. The methodology…

This paper presents a multi-scale modelling approach to investigate the underpinning mechanisms of microstructure-sensitive damage of single crystal Sn-3Ag-0.5Cu (wt%, SAC305) solder joints of a Ball Grid Array (BGA) board assembly subject…

Crystal plasticity (CP) modeling is a vital tool for predicting the mechanical behavior of materials, but its calibration involves numerous (>8) constitutive parameters, often requiring time-consuming trial-and-error methods. This paper…

Random microstructures of heterogeneous materials play a crucial role in the material macroscopic behavior and in predictions of its effective properties. A common approach to modeling random multiphase materials is to develop so-called…

This work is focused on the micromechanical modelling of the low cycle fatigue of the nickel based $\gamma/\gamma'$ superalloy AM1 at high temperature. The nature of the activated slip systems in the different types of channels of the…

A framework based on FFT is proposed for micromechanical fatigue modeling of polycrystals as alternative to the Finite Element method (FEM). The variational FFT approach is used with a crystal plasticity model for the cyclic behavior of the…

Detecting mechanical fatigue of metallic components is always a challenge in industries. In this work, we proposed to monitor the low-cycle fatigue of a 6061 aluminum alloy based on internal friction (IF) measurement, which is realized by a…

The empirical Coffin-Manson law has been used to characterize the low-cycle mechanical fatigue failure of metallic materials for decades. Our experimental studies reported in this letter have shown that the electrical fatigue failure in…

Thermal fatigue is a common failure mode in electronic solder joints, yet the role of microstructure is incompletely understood. Here, we quantify the evolution of microstructure and damage in Sn-3Ag-0.5Cu joints throughout a ball grid…

Bone is a multiscale heterogeneous materiel of which principal function is to support the body structure and to resist mechanical loading and fractures. Bone strength does not depend only on the quantity and quality of bone which is…