相关论文: PCB Coil Design Producing a Uniform Confined Magne…

This paper investigates the magnetic fields produced by a three-coil system, focusing on how different mesh resolutions affect the accuracy of the results. Using both the Poisson solver, as well as a numerical approach based on the solution…

Scanning-probe magnetometry is a valuable experimental tool to investigate magnetic phenomena at the micro- and nanoscale. We theoretically analyze the possibility of measuring magnetic fields via the electrical current flowing through…

We present an explicit theoretical framework for constructing artificial modular coils based solely on equilibrium properties, achieved through the formulation of a current potential defined on flux surfaces. We demonstrate that key…

A conduction-cooled superconducting magnet producing a transverse field of 4 Tesla has been designed for the new generation multi-field coupling measurement system, which was used to study the mechanical behavior of superconducting samples…

Permanent magnets with high-permeability yokes have been widely used in watt balances for supplying a robust and strong magnetic field at the coil position. Subjected to the mechanical realization, only several $B_r(z)$ (radial magnetic…

Adaptable, low-cost, coils designed by carefully selecting the arrangements and geometries of simple primitive units are used to generate magnetic fields for diverse applications. These extend from magnetic resonance and fundamental physics…

In this paper, we present the observation of the electric field control on the charge-ordering and metamagnetic transitions during the magnetization measurements in a single crystal of Pr0.6Ca0.4MnO3 (PCMO). We have demonstrated that the…

This work introduces the design analysis simulation and a standard MEMS fabrication process for a three dimensional microcoil with a magnetic core and a digital switch configuration using a completely integrated fully MEMS compatible…

The magnetised 51 kton Iron Calorimeter (ICAL) detector proposed to be built at INO is designed with a focus on detecting 1-20 GeV muons. The magnetic field will enable the measurement of the momentum of the $\mu^-$ and $\mu^+$ generated…

In this paper we discuss the main principles of magnetic design for superconducting magnets (dipoles and quadrupoles) for particle accelerators. We give approximated equations that govern the relation between the field/gradient, the current…

We have used ultracold atoms to characterize the magnetic field near the surface of copper conductors at room temperature carrying currents between 0.045 A and 2 A. In addition to the usual circular field we find an additional, 1000 - 10000…

In this work we present a novel, compact, power efficient magnetic field source design for magnetic field imaging microscopy. The device is based on a pair of diametrically magnetized permanent magnet cylinders with electro-mechanical…

The Electron-Ion Collider (EIC) is a proposed machine to explore the behaviour of the fundamental particles and forces that bind atomic nuclei together. The design and construction of the EIC are underway at Brookhaven National Laboratory…

Roebel cables made of HTS coated conductors can carry high currents with a compact design and reduced AC losses. They are therefore good candidates for manufacturing coils for HTS applications such as motors and generators. In this paper we…

Optical magnetometers are currently able to achieve magnetometric sensitivities below 1 fT/Hz^1/2. Although such sensitivities are typically obtained for ultra-low-field measurements, a group of optical magnetometers allows the detection of…

We propose a new method to compute magnetic surfaces that are parametrized in Boozer coordinates for vacuum magnetic fields. We also propose a measure for quasi-symmetry on the computed surfaces and use it to design coils that generate a…

Uniform magnetic field generation is one of the key issues in many physical applications; such as magnetic resonance imaging, magnetic probs etc. There are many ways to obtain highly homogeneous fields. For instance, ellipsoidal bodies -…

A racetrack coil using MgB2/Cu strand has been fabricated and tested for transport current density at 4.2 K in self field. The monofilamentary strand was 1.0 mm OD and insulated with S-glass braid. Eighty turns of strand (42 m) were wound…

We derive a closed-form expression of the magnetic field of a finite-size current sheet and use it to calculate the field of permanent magnets, which are modeled through their surface current densities. We illustrate the method by…

We extend the foil winding homogenization method to magnetic field conforming formulations. We first propose a full magnetic field foil winding formulation by analogy with magnetic flux density conforming formulations. We then introduce the…