相关论文: Profilometry with digital fringe-projection at the…
Microscopic fringe projection profilometry is a powerful 3D measurement technique with a theoretical measurement accuracy better than one micron provided that the measured targets can be imaged with good fringe visibility. However,…
Conventional dual-frequency fringe projection algorithm often suffers from phase unwrapping failure when the frequency ratio between the high frequency and the low one is too large. Zhang et.al. proposed an enhanced two-frequency…
This paper presents the results of a comprehensive study on the optimization of the optical system for independent amplitude and phase wavefront manipulation, which is based on a digital micromirror device implementation. The parameters of…
360-degrees digitalization of three-dimensional (3D) solids using a projected light-strip is a well established technique. These profilometers project a light-strip over the solid under analysis while the solid is rotated a full revolution.…
In this paper we apply the frequency transfer function (FTF) formalism to analyze the red, green and blue (RGB) phase-shifting fringe-projection profilometry technique. The phase-shifted fringe patterns in RGB fringe projection are…
This paper reviews two techniques that have been recently published for 3D profilometry and proposes one shot profilometry using iterative two-step temporal phase-unwrapping by combining the composite fringe projection and the iterative…
We propose a high signal-to-noise extended depth-range three-dimensional (3D) profilometer projecting two linear-fringes with close phase-sensitivity. We use temporal phase-shifting algorithms (PSAs) to phase-demodulate the two close…
Fringe projection profilometry (FPP) is a widely used technique for measuring object surface form and three-dimensional (3D) geometry, capable of delivering high-precision, high-resolution measurements when paired with suitable cameras and…
Fast-speed and high-accuracy three-dimensional (3D) shape measurement has been the goal all along in fringe projection profilometry (FPP). The dual-frequency temporal phase unwrapping method (DF-TPU) is one of the prominent technologies to…
Fringe-projection profilometry with 1 camera and 1 fringe-projector is a well-known and widely used technique in optical metrology. Spatial-frequency multiplexing interferometry with several spatial-carriers having non-overlapping…
It is a challenge for Phase Measurement Profilometry (PMP) to measure objects with a large range of reflectivity variation across the surface. Saturated or dark pixels in the deformed fringe patterns captured by the camera will lead to…
The multi-frequency temporal phase unwrapping (MF-TPU) method, as a classical phase unwrapping algorithm for fringe projection profilometry (FPP), is capable of eliminating the phase ambiguities even in the presence of surface…
Fringe projection profilometry has been increasingly sought and applied in dynamic three-dimensional (3D) shape measurement. In this work, a robust and high-efficiency 3D measurement based on Gray-code light is proposed. Unlike the…
Phase Measuring Deflectometry (PMD) acquires the two components of the local surface gradient via a sequence of two orthogonal sinusoidal fringe patterns that have to be displayed and captured separately. We will demonstrate that the…
We describe a theoretical analysis and experimental set-up of a co-phased 360-degree fringe-projection profilometer. This 360-degree profilometer is built using 2-projections and 1-camera and can digitize discontinuous solids with diffuse…
We present a superpixel method for full spatial phase and amplitude control of a light beam using a digital micromirror device (DMD) combined with a spatial filter. We combine square regions of nearby micromirrors into superpixels by low…
Phase shift profilometry has become a standard technique for recording the surface of an object using the projection of sinusoidal patterns. We present a method of projecting the patterns via a pair of single-mode optical fibers mounted…
Fringe projection profilometry (FPP) has become increasingly important in dynamic 3-D shape measurement. In FPP, it is necessary to retrieve the phase of the measured object before shape profiling. However, traditional phase retrieval…
The number of phase wraps in 2D wrapped phase map can be completely eliminated, or greatly reduced by frequency shifting. But the wraps usually cannot be optimally reduced using the conventional fast Fourier transform (FFT) because the…
The demand for 360-degree 3D reconstruction has significantly increased in recent years across various domains such as the metaverse and 3D telecommunication. Accordingly, the importance of precise and wide-area 3D sensing technology has…