相关论文: CFD simulations of turbulent flow in the human upp…
Computational fluid dynamics (CFD) is a useful tool for prediction of turbulence in aerodynamic and biomedical applications. The choice of appropriate turbulence models is key to reaching accurate predictions. The present investigation…
The study is looking into the potential of using computational fluid dynamics (CFD) as a tool for predicting the outcome of surgery for alleviation of obstructive sleep apnea syndrome (OSAS). From pre- and post-operative computed tomography…
Airflow through the nasal cavity exhibits a wide variety of fluid dynamicsbehaviour due to the intricacy of the nasal geometry. The flow is naturallyunsteady and perhaps turbulent, despite CFD in the literature that assumesa steady laminar…
Reynolds-Averaged Navier-Stokes(RANS) method will still play a vital role in the following several decade in aerospace engineering. Although RANS models are widely used, empiricism and large discrepancies between models reduce the…
Turbulent flow has been extensively studied using computational fluid dynamics (CFD) simulations since turbulent flow regime is so frequently encountered in both academic and engineering applications. The high-fidelity simulation of the…
This work determines the inaccuracy of using Reynolds averaged Navier Stokes (RANS) turbulence models in transition to turbulent flow regimes by predicting the model-based discrepancies between RANS and large eddy simulation (LES) models…
To fully evaluate a turbulent flow, Direct Numerical Simulation (DNS) is the most accurate method by far and requires considerable computational power and time; not optimum for industry standards. Developing an alternative model, providing…
This paper presents a novel CFD-driven machine learning framework to develop Reynolds-averaged Navier-Stokes (RANS) models. The CFD-driven training is an extension of the gene expression programming method (Weatheritt and Sandberg, 2016),…
Cavitation is a complex multiphase phenomenon characterised by vapour bubbles forming due to a sudden pressure drop and is often accompanied by increased hull vibrations, increased radiated noise and decrease in propeller and impeller…
Fan-array wind generators (FAWGs) provide controlled turbulent inflow conditions that cannot be reproduced in conventional wind tunnels. Despite their increasing use in experimental studies, numerical modeling of FAWG-generated flows…
The Reynolds-averaged Navier-Stokes (RANS) equations for steady-state assessment of incompressible turbulent flows remain the workhorse for practical computational fluid dynamics (CFD) applications. Consequently, improvements in speed or…
The volume of fluid (VOF) method is increasingly used in computational fluid dynamics (CFD) simulations of turbulent two-phase flows. The Reynolds-Averaged Navier-Stokes (RANS) approach is an economic and practical way for turbulent VOF…
Solving the Reynolds-averaged Navier-Stokes equations (RANS) closed with an eddy viscosity computed through a turbulence model is still the leading approach for Computational Fluid Dynamics simulations. Unfortunately, universal models with…
Accurate simulations of the flow in the human airway are essential for advancing diagnostic methods. Many existing computational studies rely on simplified geometries or turbulence models, limiting their simulation's ability to resolve flow…
This chapter provides an introduction to data-driven techniques for the development and calibration of closure models for the Reynolds-Averaged Navier--Stokes (RANS) equations. RANS models are the workhorse for engineering applications of…
Reynolds-Averaged Navier-Stokes (RANS) models are widely used for turbulent flow simulations due to their computational efficiency, but their accuracy strongly depends on the selected turbulence closure and may vary across the flow domain.…
The applicability of computational fluid dynamics (CFD) based design tools depend on the accuracy and complexity of the physical models, for example turbulence models, which remains an unsolved problem in physics, and rotor models that…
In the present paper, an aerodynamic investigation of a high-speed train is performed. In the first section of this article, a generic high-speed train against a turbulent flow is simulated, numerically. The Reynolds-Averaged Navier-Stokes…
Reynolds-averaged Navier-Stokes (RANS) turbulence models (such as k-\epsilon models) are still widely used for engineering applications because of their relatively simplicity and robustness. In fully developed plane channel flow (i.e. the…
A local artificial neural network (LANN) framework is developed for turbulence modeling. The Reynolds-averaged Navier-Stokes (RANS) unclosed terms are reconstructed by artificial neural network (ANN) based on the local coordinate system…