相关论文: Extruded Mg based hybrid composite alloys studied …
A sigma-phase Fe65.9V34.1 alloy was investigated with the AC magnetic susceptibility as a function of temperature, frequency and external magnetic field. An evidence was found that its magnetism shows features characteristic of a reentrant…
We report on the interplay between creep and residual stresses in a carbopol microgel. When a constant shear stress $\sigma$ is applied below the yield stress $\sigma_\text{y}$, the strain is shown to increase as a power law of time,…
The creep behavior of an amorphous poly(etherimide) (PEI) polymer is investigated in the vicinity of its glass transition in a weakly non linear regime where the acceleration of the creep response is driven by local configurational…
Flux-creep data was obtained for fields along the second magnetization peak observed in M(H) curves of BaFe{1.9}Ni{0.1}As2 for H||c-axis. H||ab-planes and H forming a 45 degrees angle with ab-planes. The M-H loops from the different field…
In this work electron backscattered diffraction (EBSD)-assisted slip trace analysis and transmission electron microscopy have been utilized to investigate the interaction of basal dislocations with precipitates in the Mg alloys…
The static and time-dependent behaviours of adhesively bonded polyethylene Double-Strap (DS) joints were investigated to assess the viability of this joint configuration relative to the Single-Lap (SL) joints. Both experiments and finite…
The study of materials behavior under extreme conditions is fundamental to science and modern technology. Fast ramp compression is a unique method for exploring materials behavior and phase transformations under extreme conditions. One…
There is a long standing technological problem in which a stress dwell during cyclic loading at room temperature in Ti causes a significant fatigue life reduction. It is thought that localised time dependent plasticity in soft grains…
The occurrence of high stress concentrations in reactor components is a still intractable phenomenon encountered in fusion reactor design. We observe and quantitatively model a non-linear high-dose radiation mediated microstructure…
Iron self-diffusion in nano-composite FeZr alloy has been investigated using neutron reflectometry technique as a function of applied compressive stress. A composite target of (Fe+Zr) and (57Fe+Zr) was alternatively sputtered to deposit…
In this paper, the thermo-mechanical behaviour of hemp fibres (Cannabis sativa L.) is investigated using a Dynamic Mechanical Analyser. Experiments are performed at a frequency of 1 Hz in the temperature range of 20 to 220\degree C. When a…
The present work deals with the microstructure and texture evolutions of a TWIP high entropy alloy at various temperatures. Toward this end, the tensile tests were conducted at temperatures ranging from 298 to 873 K under the strain rate of…
High entropy alloys (HEAs) are multi-principal-element alloys designed for tailorable mechanical performance and have been attracting significant engineering interest, yet their fundamental behaviour under extreme dynamic conditions, such…
A new phenomenological model of cyclic creep is proposed which is suitable for applications involving finite creep deformations of the material. The model accounts for the the effect of the transient increase of the creep strain rate upon…
Polycrystalline materials have a viscoelastic rheology where the strains produced by stresses depend on the timescale of deformation. Energy can be stored elastically within grain interiors and dissipated by a variety of different…
The advantages introduced by carbon fiber reinforced polymer (CFRP) composites has made them an appropriate choice in many applications and an ideal replacement for conventional materials. The benefits using CFRP composites are due to their…
Chromium thin films deposited on silicon substrates by DC magnetron sputtering were systematically investigated as a function of film thickness, using a DC power of 50 W and a post-deposition annealing temperature of 200 C. Two types of…
The mixed-state Hall effect was examined in a Ba(Fe1-xCox)2As2 epitaxial film with a high critical current density. The transverse resistivity {\rho}xy and the longitudinal resistivity {\rho}xx follow power law scaling {\rho}xy =…
The lattice parameters of the tetragonal compounds Ce$M$In$_{5}$ and Ce$_{2}M$In$_{8}$($M=$Rh, Ir and Co) have been studied as a function of pressure up to 15 GPa using a diamond anvil cell under both hydrostatic and quasihydrostatic…
Granular packings display a wealth of mechanical features which are of widespread significance. One of these features is creep: the slow deformation under applied stress. Creep is common for many other amorphous materials such as many…