相关论文: Review on Titania Nanopowder- Processing and Appli…
A constant supply of oxygen has been assumed to be necessary for the growth of titanium nanoparticles by sputtering. This oxygen supply can arise from a high background pressure in the vacuum system or from a purposely supplied gas. The…
To investigate excess-hydrolysis of titanium alkoxides, TiO2 powders were fabricated from titanium-tetra-isopropoxide using 6:1 and 100:1 H2O:Ti (r) ratios. Powders were dried and fired at a range of temperatures ( up to 800 C).…
Dyes used in industries such as textile, paper, and leather are known to be harmful to both human health and aquatic ecosystems. Therefore, finding effective and sustainable methods to remove dyes from wastewater is crucial for mitigating…
A template-free process for the synthesis of nanocrystalline TiO2 hierarchical microstructures by reactive Pulsed Laser Deposition (PLD) is here presented. By a proper choice of deposition parameters a fine control over the morphology of…
Developing colloidal plasmonic nanomaterials with high carrier density that show optical resonances and photochemical activity extending from the visible to the mid-infrared (MIR) ranges remains a challenging pursuit. Here, we report the…
Graphene/TiO2 nanocrystals hybrid is successfully prepared by directly growing TiO2 nanocrystals on graphene oxide (GO) sheets. The direct growth of nanocrystals on GO sheets was achieved by a two-step method, in which TiO2 was coated on GO…
This work reports aspect related to nano-sized particles of tetragonal anatase phase Titania. This approach is simple, faster, Eco-friendly, cost effective and suitable for large scale production. X-Ray Diffraction studies analyze particles…
Bismaleimide (BMI) resin/ titania nanocomposites were synthesized from allylated-phenolic modified bismaleimide resin and TiO2 via the sol-gel process of tetrabutyltitanate (Ti(OnBu)4, TBT). These nanocomposite materials were characterized…
This study utilizes molecular dynamics simulations to scrutinize the influence of type and volume fraction of nanoparticle on the density of nanofluids, i.e. silver (as a hydrophilic case) and titanium dioxide (as a hydrophobic case)…
The efforts in the optimization of the physical and chemical properties related to the photocatalytic efficiency of TiO2 nanoparticles relies mainly on defect engineering strategies, been the structural and the doping the most common ones.…
Choice of material is ubiquitous in integrated photonics to design device properties, whereas changing material composition is much less common. With phase matching as an additional objective, constraints in depositing and patterning thin…
This research for Eco-materials focuses on the improvement of photo response of titania thin films. The goal of this research is to find a suitable substrate for decreasing the band-gap of titania, to improve the microstructure and to seek…
TiO$_2$ and WO$_3$ are two of the most important earth-abundant electronic materials with applications in countless industries. Recently alloys of WO$_3$ and TiO$_2$ have been investigated leading to improvements of key performance…
Cu-Sn-Zn coatings have been widely used in industry for their unique properties, such as good conductivity, high corrosion resistance and excellent solderability. To further improve the mechanical performance of Cu-Sn-Zn coatings,…
Present paper reports the LPG sensing of TiO2 obtained through ball milling. The milled powder was characterized by XRD, TEM and UV-visible spectroscopy. Further the ball milled powder was compressed in to pellet using hydraulic press. This…
Over the past ten years, self-aligned TiO2 nanotubes have attracted tremendous scientific and technological interest due to their anticipated impact on energy conversion, environment remediation and biocompatibility. In the present…
In this work, we have developed economic process to elaborate scalable titanium dioxide nanotube layers which show a tunable functionality. The titanium dioxide nanotube layers was prepared by electrochemical anodization of Ti foil in 0.4…
The inherent network of nanopores and voids in silicon dioxide (SiO2) is generally undesirable for aspects of film quality, electrical insulation and dielectric performance. However, if we view these pores as natural nano-patterns embedded…
We report here a new concept, the use of bipolar electrochemistry, which allows the rapid and wireless growth of self-assembled TiO2 NT layers that consist of highly defined and controllable gradients in NT length and diameter. The gradient…
The nucleation and growth of pure titanium nanoparticles in a low-pressure sputter plasma has been believed to be essentially impossible. The addition of impurities, such as oxygen or water, facilitates this and allows the growth of…