相关论文: A Real-Time Millimeter-Wave Phased Array MIMO Chan…

This paper discusses early results associated with a fully-digital direct-conversion array receiver at 28~GHz. The proposed receiver makes use of commercial off-the-shelf (COTS) electronics, including the receiver chain. The design consists…

Multiple-input-multiple-output (MIMO) millimeter-wave (mmWave) sensors for synthetic aperture radar (SAR) and inverse SAR (ISAR) address the fundamental challenges of cost-effectiveness and scalability inherent to near-field imaging. In…

The directionality of millimeter-wave (mmWave) communications creates a significant challenge in serving fast-moving mobile terminals on, e.g., high-speed vehicles, trains, and UAVs. This challenge is exacerbated in mmWave systems using…

Millimeter-wave massive MIMO with lens antenna array can considerably reduce the number of required radio-frequency (RF) chains by beam selection. However, beam selection requires the base station to acquire the accurate information of…

The design of cell-free massive MIMO (CF-mMIMO) systems requires accurate, measurement-based channel models. This paper provides the first results from the by far most extensive outdoor measurement campaign for CF-mMIMO channels in an urban…

Modern MIMO communication systems are almost exclusively designed under the assumption of locally plane wavefronts over antenna arrays. This is known as the far-field approximation and is soundly justified at sub-6-GHz frequencies at most…

In order to cope with the large path-loss exponent of mm-Wave channels, a high beamforming gain is needed. This can be achieved with small hardware complexity and high hardware power efficiency by Hybrid Digital-Analog (HDA) beamforming,…

Most works evaluating the performance of Multi-User Multiple-Input Multiple-Output (MU-MIMO) systems consider Access Points (APs) with fixed antennas, that is, without any movement capability. Recently, the idea of APs with antenna arrays…

This paper develops a channel estimation technique for millimeter wave (mmWave) communication systems. Our method exploits the sparse structure in mmWave channels for low training overhead and accounts for the phase errors in the channel…

Resonant optical phased arrays are a promising way to reach fully reconfigurable metasurfaces in the optical and NIR regimes with low energy consumption, low footprint and high reliability. Continuously tunable resonant structures suffer…

Understanding wireless channels is crucial for the design of wireless systems. For mobile communication, sounders and antenna arrays with short measurement times are required to simultaneously capture the dynamic and spatial channel…

This paper tackles the challenge of wideband MIMO channel estimation within indoor millimeter-wave scenarios. Our proposed approach exploits the integrated sensing and communication paradigm, where sensing information aids in channel…

We describe 280 GHz bolometric detector arrays that instrument the balloon-borne polarimeter SPIDER. A primary science goal of SPIDER is to measure the large-scale B-mode polarization of the cosmic microwave background in search of the…

Wireless backhaul communication has been recently realized with large antennas operating in the millimeter wave (mmWave) frequency band and implementing highly directional beamforming. In this paper, we focus on the alignment problem of…

Massive MIMO, also known as very-large MIMO or large-scale antenna systems, is a new technique that potentially can offer large network capacities in multi-user scenarios. With a massive MIMO system, we consider the case where a base…

Nowadays, long distance optical fibre transmission systems use polarization diversity multiplexed signals to enhance transmission performance. Distributed acoustic sensors (DAS) use the same propagation medium ie. single mode optical fibre,…

Distributed phased arrays based multiple-input multiple-output (DPA-MIMO) is a newly introduced architecture that enables both spatial multiplexing and beamforming while facilitating highly reconfigurable hardware implementation in…

With abundant bandwidth resource, the Terahertz band (0.1~THz to 10~THz) is envisioned as a key technology to realize ultra-high data rates in the 6G and beyond mobile communication systems. However, moving to the THz band, existing channel…

Millimeter wave is a promising technology for the next generation of wireless systems. As it is well-known for its high path loss, the systems working in this spectrum tend to exploit the shorter wavelength to equip the transceivers with a…

With the relatively recent realization that millimeter wave frequencies are viable for mobile communications, extensive measurements and research have been conducted on frequencies from 0.5 to 100 GHz, and several global wireless standard…