相关论文: Anomalous Hardening in Magnesium Driven by a Size-…
Deformation twinning is an important deformation mechanism in a variety of materials, including metals and ceramics. This deformation mechanism is particularly important in low-symmetry hexagonal close-packed (hcp) metals such as Magnesium…
Plastic deformation of metallic alloys usually takes place through slip, but occasionally involves twinning. In particular, twinning is important in hexagonal close packed materials where the easy slip systems are insufficient to…
Deformation twinning in pure aluminum has been considered to be a unique property of nanostructured aluminum. A lingering mystery is whether deformation twinning occurs in coarse-grained or single-crystal aluminum, at scales beyond…
Twinning is a primary deformation mechanism in Mg alloys. This study focuses on tension twins during uniaxial compression of Mg-Y alloys, with three key aspects: the orientation specificity of twin grains, the relative evolution of CRSS…
The cyclic deformation behavior of extruded Mg-8.5wt.%Al alloy with a conventional extrusion texture and a modified texture is systematically investigated by in-situ neutron diffraction and elastic viscoplastic self-consistent (EVPSC)…
Contraction twinning in magnesium alloys leads to new grains that are misoriented from the parent grain by a rotation of 56 deg around the a-axis. The classical theory of deformation twinning does not precise the atomic displacements and…
Titanium alloys are widely used in aerospace, biomedical, and energy applications owing to their high specific strength, corrosion resistance, and biocompatibility. Among them, $\alpha$-titanium alloys with a hexagonal close-packed (hcp)…
Deformation twinning is a form of permanent deformation that is commonly observed in low symmetry crystals such as hexagonal close-packed (hcp) metals. With recent increased interest in using hcp metals, such as magnesium, in structural,…
A crystallographic displacive model is proposed for the extension twins in magnesium. It is based on a hard-sphere assumption previously used for martensitic transformations. The atomic displacements are established, and the homogeneous…
Although magnesium alloys deform extensively through shear strains and crystallographic re-orientations associated with the growth of twins, little is known about the strengthening mechanisms associated with this deformation mode. A crystal…
A polycrystalline plasticity model, which incorporates the contribution of deformation twinning, is proposed. For this purpose, each material point is treated as a composite material consisting of a parent constituent and multiple twin…
Deformation twinning is generally considered to be the primary mechanism for hexagonal close-packed (hcp) metals due to their limited slip systems. Recent microcompression experiments on hcp metals point to intriguing strong size effects on…
Twinning is an important deformation mode of hexagonal close-packed metals. The crystallographic theory is based on the 150-years old concept of simple shear. The habit plane of the twin is the shear plane, it is invariant. Here we present…
Nanopowder consolidation under high strain rate shock compression is a potential method for synthesizing and processing bulk nanomaterials. A thorough investigation of the shock deformation of powder materials is of great engineering…
A numerical strategy to simulate plastic deformation in Mg alloys including dislocation slip and twin propagation is presented. Dislocation slip is included through a crystal plasticity model which is solved using the finite element method…
At two-thirds the weight of aluminum, magnesium alloys have the potential to significantly reduce the fuel consumption of transportation vehicles. These advancements depend on our ability to optimize the desirable versus undesirable effects…
Strain-controlled fatigue of Mg-1Mn-0.5Nd (wt.\%) alloy were studied by experiment and simulation. The microstructure was made up of a dispersion of strongly texture grains (13\%) embedded in a matrix of grains with a random texture. The…
The objective of this work is to deconvolute the interaction of slip, twinning, and notch on the deformation response of an austenitic manganese (Hadfield) steel using detailed finite element simulations. The simulations employ a…
Tensile twinning is a main deformation mode in hexagonal close packed structure metals, so it is important to comprehensively understand twinning mechanisms which are not fully disclosed using 2D or small volume 3D characterization…
Plastic work partitioning was investigated in extruded AZ31B magnesium alloy under loading orientations promoting slip- or twinning-dominated deformation. Slip-dominated deformation exhibits stable plastic flow with approximately 50$\%$ of…