相关论文: Repetition rate stabilization of an optical freque…
We demonstrate an optical frequency comb based on an erbium-doped-fiber femtosecond laser with the nonlinear polarization evolution scheme. The repetition rate of the laser is about 209 MHz. By controlling an intra-cavity electro-optic…
Optical frequency combs, with precise control of repetition rate and carrier-envelope-offset frequency, have revolutionized many fields, such as fine optical spectroscopy, optical frequency standards, ultra-fast science research,…
In this paper, we present an experimental study of the metrological stabilization of a solid-state frequency comb for embedded metrology applications. The comb is a passively mode-locked laser diode based on InGaAs/InP Quantum-dash…
We report on the characterization of a commercial-core fiber-based frequency comb equipped with an intracavity electro-optic modulator (EOM). We investigate the relationship between the noise of the pump diode and the laser relative…
We demonstrate the use of a flexible digital servo system for the optical stabilization of both the repetition rate and carrier-envelope offset frequency of a laser frequency comb. The servo system is based entirely on a low-cost field…
Electro-optical modulation of a continuous wave laser is a highly stable way to generate frequency combs, gaining popularity in telecommunication and spectroscopic applications. These combs are generated by modulating non-linear…
We demonstrate absorber-free passive and hybrid mode-locking at sub-GHz repetition rates using a hybrid integrated extended cavity diode laser around 1550 nm. The laser is based on InP as gain medium and a long Si$_3$N$_4$ feedback circuit,…
Modelocked frequency comb lasers have always operated with a single pulse circulating in the laser cavity. This meant that each laser technology had an associated limit on pulse repetition rate. Achieving higher rates required different…
An experimental method is developed for the robust frequency stabilization using a high-finesse cavity when the laser exhibits large intermittent frequency jumps. This is accomplished by applying an additional slow feedback signal from…
Frequency stabilisation of lasers to optical reference cavities is an established method to achieve state-of-the-art stability. The strengths of this method are the high discriminator coefficient of optical cavities, and the low-noise…
Reducing the pulse repetition rate of an optical frequency comb increases the pulse energy for a given average power. This enhances the efficiency of nonlinear frequency conversion and it facilitates extending the accessible wavelength…
We reduce the intensity noise of laser light by using an electro-optic modulator and a cousto-optic modulator in series. The electro-optic modulator reduces noise at high frequency(10 kHz to 1 MHz), while the acousto-optic modulator sets…
Optical injection locking of the repetition frequency of a quantum cascade laser frequency comb is demonstrated using an intensity modulated near-infrared light at 1.55 $\mu$m illuminating the front facet of the laser. Compared to the…
We demonstrate two fully and tightly phase locked 750 MHz ytterbium (Yb) fiber frequency combs that are independently stabilized to a continuous wave (CW) laser with <1 rad RMS phase error. A bulk EOM and a single stack PZT are separately…
We report the relative frequency stabilization of a distributed feedback erbium-doped fiber laser on an optical cavity by serrodyne frequency shifting. A correction bandwidth of 2.3 MHz and a dynamic range of 220 MHz are achieved, which…
We demonstrate control and stabilization of an optical frequency comb generated by four-wave mixing in a monolithic microresonator with a mode spacing in the microwave regime (86 GHz). The comb parameters (mode spacing and offset frequency)…
Robust control and stabilization of optical frequency combs enables an extraordinary range of scientific and technological applications, including frequency metrology at extreme levels of precision, novel spectroscopy of quantum gases and…
A narrow-bandwidth actively mode-locked laser using a Cr:ZnS gain medium has been successfully demonstrated. A free-space electro-optic phase modulator is employed in the solid-state laser resonator to achieve frequency-modulation (FM)…
It is demonstrated that RF current modulation of a frequency stabilized injection-locked diode laser allows the stabilization of an optical cavity to adjustable lengths, by variation of the RF frequency. This transfer cavity may be used to…
We report the frequency noise suppression of a 674nm diode laser by phase-locking it to a 1560nm cavity-stabilized laser, using a commercial optical frequency comb. By phase-locking the frequency comb to the narrow reference at telecom…