相关论文: Enhanced Performance of Dye-Sensitized Solar Cells…
In the present work we compare TiO2 nanotube lift-off strategies for the construction of front-side illuminated dye-sensitized solar cells (DSSCs). Anodic nanotube layers were detached from the metallic back contact by using different…
We fabricate photo-anodes by transferring anodic TiO2 nanotube membranes in tube-top-down configuration on FTO glass, and use them for constructing frontside illuminated dye-sensitized solar cells. Prior to solar cell construction, the…
In the present work we grow anodic TiO$_2$ nanotube layer with tube diameter ~ 500 nm and an open tube mouth. We use this morphology in dye-sensitized solar cells (DSSCs) and show that these tubes allow the construction of hybrid…
The conversion efficiency of dye-sensitized solar cells (DSSCs) is optimized by modifying the optical design and improving absorbance within the cell. These objectives are obtained by creating different sized cavities in TiO2 photoanode.…
In the present work we introduce a path to the controlled construction of DSSCs based on hierarchically structured single walled, self-organized TiO2 layers. In a first step we describe a simple approach to selectively remove the inner…
The surface states of the active TiO2 layer is crucial while fabricating an efficient solar cell. This work experimentally analyses the effect of exposing TiO2 based electron transport layer (ETL) to the ultraviolet-ozone (UV-O3) and…
In the present work, we introduce the anodic growth of conical shaped TiO2 nanotube arrays. These titania nanocones provide a scaffold for dye-sensitized solar cell (DSSC) structures with significantly improved photon management, providing…
Understanding mechanisms in DSSCs is fundamental for their improvement; this includes the nanocrystalline semiconducting layer behaviour. Different mesoporous TiO2 layers are fabricated and analyzed for possible use in DSSC solar cells. The…
Dye Sensitized Solar Cells (DSSCs) have recently regained attention for indoor light harvesting and powering wireless devices. Advantages such as cost-effectiveness, flexibility, wide angular response, and lightweight design have driven the…
Nano-scaled metallic or dielectric structures may provide various ways to trap light into thin-film solar cells for improving the conversion efficiency. In most schemes, the textured active layers are involved into light trapping structures…
Plasmonic core-shell nanoparticles (PCSNPs) can function as nanoantennas and improve the efficiency of dye-sensitized solar cells (DSSCs). To achieve maximum enhancement, the morphology of PCSNPs need to be optimized. Here we precisely…
Electrodes in dye sensitised solar cells (DSSCs) are typically nanocrystalline anatase TiO2 with a majority (101) surface exposed. Generally the sensitising dye employs a carboxylic anchoring moiety through which it adheres to the TiO2…
TiO2 nanorods have been prepared on ITO substrates by dc reactive magnetron sputtering technique. The hydroxyl groups have been introduced on the nanorods surface. The structure and the optical properties of these nanorods have been…
Dye-sensitized solar cells (DSC), built upon organic/inorganic hybrid materials, are promising third generation solar cells, which attract wide attentions due to their low-cost, flexibility and environment-friendly properties. We review…
The hybrid metal-dielectric nanostructures (HMDN) are promising candidates to address the ohmic loss by conventional nanostructures in photovoltaic applications by strong confinement and high scattering directivity. In this study, we…
We report the development of broadband solar absorber coatings based on titanium suboxide composite thin films on aluminium substrates. The films are fabricated via scalable DC magnetron sputtering using a Ti target, followed by…
The present work reports on the enhancement of TiO2 nanotubes photoelectrochemical water splitting rate by decorating the nanostructure with an amine layer in a hydrothermal process using diethylenetriamine (DETA). The aminate coated TiO2…
In this work we study the optoelectronic properties of individual TiO2 fibres produced through coupled sol-gel and electrospinning, by depositing them onto pre-patterned Ti/Au electrodes on SiO2/Si substrates. Transport measurements in the…
Dye sensitised nanocrystalline solar cells (Gr\"{a}tzel cells) have achieved solar-to-electrical energy conversion efficiencies of 12% in diffuse daylight. The cell is based on a thin film of dye-sensitised nanocrystalline TiO$_2$…
Nano-scaled dielectric and metallic structures are popular light tapping structures in thin-film solar cells. However, a large parasitic absorption in those structures is unavoidable. Most schemes based on such structures also involve the…