相关论文: Efficient Photocatalytic H2 Evolution: Controlled …
Effective co-catalysts are of key importance for photocatalytic H2 generation from aqueous environments. An attractive co-catalyst candidate are AuPt (metastable) alloys due to the synergistic electronic and chemical interaction of the…
Au nanoparticles at the TiO$_2$ surface can enhance the photocatalytic H$_2$ generation performances owing to their electron transfer co-catalytic ability. Key to maximize the co-catalytic effect is a fine control over Au nanoparticle size…
In the present work we use TiO2 nanotube arrays, carrying a Pt coating that is optimally dewetted, as a photocatalyst to generate H2. In order to achieve a maximum H2-generation efficiency, on the one hand an ideal thermal dewetting of the…
Photocatalytic $H_2$ evolution reactions on pristine TiO$_2$ is characterized by low efficiencies due to trapping and recombination of charge carriers, and due to a sluggish kinetics of electron transfer. Noble metal (mainly Pt, Pd, Au)…
In the present work we grow self-organized TiO2 nanotube arrays with a defined and controlled regular spacing between individual nanotubes. These defined intertube gaps allow to build up hierarchical 1D-branched structures, conformally…
A template-free process for the synthesis of nanocrystalline TiO2 hierarchical microstructures by reactive Pulsed Laser Deposition (PLD) is here presented. By a proper choice of deposition parameters a fine control over the morphology of…
We have observed nanopattern formation with robust and controllable spatial ordering by laser-induced dewetting in nanoscopic metal films. Pattern evolution in Co film of thickness 1\leq h\leq8 nm on SiO_{2} was achieved under multiple…
In the present work we introduce a technique to form a photocatalyst, based on Pt nanoparticles suspended over the mouth of TiO2 nanotubes. These structures are obtained by the decoration of the top end of highly ordered TiO2 nanotubes with…
Highly ordered and self supported anatase TiO2 nanoparticle chains were fabricated by calcining conformally TiO2 coated multi-walled carbon nanotubes (MWCNTs). During annealing, the thin tubular TiO2 coating that was deposited onto the…
We describe a rapid screening technique for determining the optimal characteristics of nano- photocatalysts for the production of H2 on a single surface. Arrays of TiO2 nanotubes (NTs) with a gradient in length and diameter were fabricated…
Flat TiO$_2$ layers are deposited by magnetron sputtering on Ti/Si wafers. The TiO$_2$ surfaces are then sputter-coated with thin Au films of a nominal thickness of 0.5-10 nm that are converted by solid-state dewetting into Au nanoparticles…
In the present work we explore the front- and back-side performance of a photocatalytic platform consisting of self-organized TiO2 nanotube layers formed by complete anodization of Ti metal films evaporated on quartz slides. The adhesion…
The present review gives an overview of the highlights of more than 10 years of research on synthesis and applications of ordered oxide structures (nanotube layers, hexagonal pore arrangements) that are formed by self-organizing anodization…
We apply high-energy proton ion-implantation to modify TiO2 nanotubes selectively at their tops. In the proton-implanted region we observe the creation of intrinsic co-catalytic centers for photocatalytic H2-evolution. We find proton…
Bimetallic nanoparticles are often superior candidates for a wide range of technological and biomedical applications, thanks to their enhanced catalytic, optical, and magnetic properties, which are often better than their monometallic…
Dealloying is a common corrosion process during which an alloy is "parted" by the selective dissolution of the electrochemically more active elements. This process results in the formation of a nanoporous sponge composed almost entirely of…
Au and Pt do not form homogeneous bulk alloys as they are thermodynamically not miscible. However, we show that anodic TiO$_2$ nanotubes (NTs) can in-situ be uniformly decorated with homogeneous AuPt alloy nanoparticles (NPs) during their…
Self-standing TiO$_2$ nanotube layers in the form of membranes are fabricated by self-organizing anodization of Ti metal and a potential shock technique. The membranes were then decorated by sputtering different Pt amounts i) only at the…
We develop herein plasmonic-catalytic Au-IrO$_2$ nanostructures with a morphology optimized for efficient light harvesting and catalytic surface area; the nanoparticles have a dendritic morphology, with closely spaced Au branches all…
In the present work we investigate the photocatalytic hydrogen production (water splitting) activity of different Pt loaded TiO2 nanotube layers. Therefore, we fabricate free standing membranes and fix them in four different configurations:…