相关论文: Effect of Wideband Beam Squint on Codebook Design …
In this paper, the beam squint problem, which causes significant variations in radiated beam gain over frequencies in millimeter wave communication system, is investigated. A constant modulus beamformer design, which is formulated to…
This article investigates the influential role of flexible antenna array curvature on the performance of 6G communication systems with carrier frequencies above 100 GHz. It is demonstrated that the curvature of flexible antenna arrays can…
In pursuance of the unused spectrum in higher frequencies, millimeter wave (mmWave) bands have a pivotal role. However, the high path-loss and poor scattering associated with mmWave communications highlight the necessity of employing…
With increasing frequencies, bandwidths, and array apertures, the phenomenon of beam squint arises as a serious impairment to beamforming. Fully digital arrays with true time delay per antenna element are a potential solution, but they…
Multiple-input multiple-output (MIMO) millimeter wave (mmWave) communication is a key technology for next generation wireless networks. One of the consequences of utilizing a large number of antennas with an increased bandwidth is that…
Narrow beams are key to wireless communications in millimeter wave frequency bands. Beam alignment (BA) allows the base station (BS) to adjust the direction and width of the beam used for communication. During BA, the BS transmits a number…
The narrowband and far-field assumption in conventional wireless system design leads to a mismatch with the optimal beamforming required for wideband and near-field systems. This discrepancy is exacerbated for larger apertures and…
High-frequency wideband cellular communications over mmWave and sub-THz offer the opportunity for high data rates. However, it also presents high path loss, resulting in limited coverage. High-gain beamforming from the antenna array is…
The transmitted signals in the fifth generation (5G) wireless networks suffer from significant path loss due to the use of higher frequencies in Sub-6 GHz and millimeter-wave (mmWave) bands. Inter-user interference in an ultra-dense network…
In this correspondence, we study deploying movable antenna (MA) array in a wideband multiple-input-single-output (MISO) communication system, where near-field (NF) channel model is considered. To alleviate beam squint effect, we propose to…
In this paper, we focus our attention on the mitigation of beam squint for reconfigurable intelligent surface (RIS) aided wideband millimeter wave (mmWave) communications. Due to the intrinsic passive property, the phase shifts of all…
Beam management is central in the operation of beamformed wireless cellular systems such as 5G New Radio (NR) networks. Focusing the energy radiated to mobile terminals (MTs) by increasing the number of beams per cell increases signal power…
This paper studies the effect of the user hand grip on the design of beamforming codebooks for 5G millimeter-wave (mmWave) mobile handsets. The high-frequency structure simulator (HFSS) is used to characterize the radiation fields for…
In this paper, we propose a novel hierarchical sensing framework for wideband integrated sensing and communications with uniform planar arrays (UPAs). Leveraging the beam-squint effect inherent in wideband orthogonal frequency-division…
Millimeter-wave (mmWave) multiple-input multiple-out (MIMO) systems relying on lens antenna arrays are capable of achieving a high antenna-gain at a considerably reduced number of radio frequency (RF) chains via beam selection. However, the…
Broadband beamforming is a technique to obtain the signal with a wide range of frequencies. It maintains the signal integrity and spatial selectivity over frequencies. This is important in several applications such as microphone array,…
Integrated sensing and communications (ISAC) has emerged as a means to efficiently utilize spectrum and thereby save cost and power. At the higher end of the spectrum, ISAC systems operate at wideband using large antenna arrays to meet the…
In this study, we analyze the codebook design used for analog beamforming. Analog beamforming and combining suffer from a subspace sampling limitation, that is, the receiver cannot directly observe the channel coefficients; instead, the…
With the overcrowded sub-6 GHz bands, millimeter wave (mmWave) bands offer a promising alternative for the next generation wireless standard, i.e., 5G. However, the susceptibility of mmWave signals to severe pathloss and shadowing requires…
The transmitter signals in the fifth generation (5G) wireless networks suffer from significant path loss due to the use of higher frequencies in Sub-6 GHz and millimeter-wave (mmWave) bands. Therefore, beamforming is an essential and…