相关论文: Structural transformation of implanted diamond lay…
Metal contacts are fundamental building components for graphene based electronic devices and their properties are greatly influenced by interface quality during device fabrication, leading to resistance variation. Here we show that nickel…
A combined experimental and numerical study on the variation of the elastic properties of defective single-crystal diamond is presented for the first time, by comparing nano-indentation measurements on MeV-ion-implanted samples with…
We describe a complete development process of a segmented-blade linear ion trap. Alumina substrate is characterized with an X-ray diffraction and loss-tangent measurement. The blade is laser-micromachined and polished, followed by the…
$Ar^+$ ion has been used regularly for the cleaning of semiconductor, metal surfaces for epitaxial nanostructures growth. We have investigated the effect of low-energy $Ar^+$ ion sputtering and subsequent annealing on the…
Controlled and precise fabrication of structures with heights in the range of single digit nanometres is one of the challenges for diffraction gratings operating near-normal incidence in the extreme ultraviolet (EUV) and soft X-ray range.…
We have investigated the melting of nano-sized cone shaped aluminium needles coated with amorphous carbon using transmission electron microscopy. The interface between solid and liquid aluminium was found to have spherical topology. For…
We use the all-diamond tip of an atomic force microscope for the direct engraving of high quality quantum point contacts in GaAs/AlGaAs-heterostructures. The processing time is shortened by two orders of magnitude compared to standard…
Graphite is the thermodynamically stable form of carbon, and yet is remarkably difficult to synthesise. A key step in graphite formation is the removal of defects at high temperature ($>$2300~$^{\circ}$C) that allow graphenic fragments to…
We have investigated the temperature-dependent morphology and composition changes occurring during a controlled self-assembling of thin Au film on the Gallium arsenide (001) surface utilizing electron microscopy at nano and atomic levels.…
We present an enhancement of spin properties of the shallow (<5nm) NV centers by using ALD to deposit titanium oxide layer on the diamond surface. With the oxide layer of an appropriate thickness, increases about 2 up to 3.5 times of both…
Annealing of crystalline multilayers composed of two miscible elements usually causes interfacial mixing of the constituent atoms, possibly leading to the formation of binary alloys at the interfaces. Magnetron sputtered c-Ni/a-Zr…
The pressure-induced structural transition in fcc C$_{60}$ fullerene by shock compression and rapid quenching is investigated by a semi-empirical tight-binding molecular dynamics simulation, adopting a constant-pressure scheme and a method…
The material and exact shape of a nanostructure determine its optical response, which is especially strong for plasmonic metals. Unfortunately, only a very few plasmonic metals are available, which limits the spectral range where these…
A summary of photo- and electrochemical surface modifications applied on single-crystalline chemical vapor deposition (CVD) diamond films is given. The covalently bonded formation of amine- and phenyl-linker molecule layers are…
Defects induced by liquid-phase exfoliation of graphite using sonication were studied. It was shown that localized impact by cavitation shock waves can produce bulk ripplocations and various types of dislocations in graphite nanoplatelets.…
Levitated nanodiamonds containing nitrogen vacancy centres in high vacuum are a potential test bed for numerous phenomena in fundamental physics. However, experiments so far have been limited to low vacuum due to heating arising from…
This study investigates thermal transport across nanocrystalline diamond/AlGaN interfaces, crucial for enhancing thermal management in AlGaN/AlGaN-based devices. Chemical vapor deposition growth of diamond directly on AlGaN resulted in a…
Atomic-size spin defects in solids are unique quantum systems. Most applications require nanometer positioning accuracy, which is typically achieved by low energy ion implantation. So far, a drawback of this technique is the significant…
Scalable realizations of quantum network technologies utilizing the nitrogen vacancy center in diamond require creation of optically coherent NV centers in close proximity to a surface for coupling to optical structures. We create single NV…
The study of scattering and extinction properties of possible nanodiamond grains in the ISM are reported. Calculations using Discrete Dipole Approximation (DDA) for varying ellipsoidal shapes and sizes from 2.5 to $10 nm$ are considered.…