相关论文: The Infrared Imaging Spectrograph (IRIS) for TMT: …

The Mid-Infrared Instrument (MIRI) Medium Resolution Spectrometer (MRS) is the only mid-IR Integral Field Spectrometer on board James Webb Space Telescope. The complexity of the MRS requires a very specialized pipeline, with some specific…

The Imager on Board Integral Satellite (IBIS) is the imaging instrument of the INTEGRAL satellite, the hard-X/soft-gamma ray ESA mission to be launched in 2001. It provides diagnostic capabilities of fine imaging (12' FWHM), source…

Reconfigurable intelligent surface (RIS) can effectively control the wavefront of the impinging signals and has emerged as a cost-effective promising solution to improve the spectrum and energy efficiency of wireless systems. Most existing…

Iris recognition is widely acknowledged for its exceptional accuracy in biometric authentication, traditionally relying on near-infrared (NIR) imaging. Recently, visible spectrum (VIS) imaging via accessible smartphone cameras has been…

HIRES, a high resolution spectrometer, is one of the first five instruments foreseen in the ESO roadmap for the E-ELT. This spectrograph should ideally provide full spectral coverage from the UV limit to 2.5 microns, with a resolving power…

Multiple-input-multiple-output (MIMO) millimeter-wave (mmWave) sensors for synthetic aperture radar (SAR) and inverse SAR (ISAR) address the fundamental challenges of cost-effectiveness and scalability inherent to near-field imaging. In…

The IBIS telescope onboard INTEGRAL, the ESA gamma-ray space mission to be launched in 2002, is a soft gamma-ray (20 keV - 10 MeV) device based on a coded aperture imaging system. We describe here basic concepts of coded masks, the imaging…

We present basic observational strategies for ASTRO-F (also known as the Imaging Infra Red Surveyor (IRIS)) to be launched in 2004 by the Japanese Institute of Space and Astronautical Science (ISAS). We examine 2 survey scenarios, a deep…

We present the current results from the development of a wide integral field infrared spectrograph (WIFIS). WIFIS offers an unprecedented combination of etendue and spectral resolving power for seeing-limited, integral field observations in…

The iterative refinement method (IRM) has been very successfully applied in many different fields for examples the modern quantum chemical calculation and CT image reconstruction. It is proved that the refinement method can create an exact…

We present 3.6 and 4.5 um photometry for a set of 61 standard stars observed by Spitzer's Infrared Spectrograph (IRS). The photometry was obtained with the Infrared Array Camera (IRAC) on Spitzer in order to help tie the calibration of IRAC…

Reconfigurable intelligent surfaces (RISs) enable reliable low-latency millimeter wave (mmWave) communication links in cases of a blocked line-of-sight (LoS) between the base station (BS) and the user equipment (UE), i.e. a RIS mounted on a…

In this article, we describe the MIRI Imager module (MIRIM), which provides broad-band imaging in the 5 - 27 microns wavelength range for the James Webb Space Telescope. The imager has a 0"11 pixel scale and a total unobstructed view of…

Neural Radiance Fields achieve high-fidelity scene representation but suffer from costly training and rendering, while 3D Gaussian splatting offers real-time performance with strong empirical results. Recently, solutions that harness the…

TMT has defined the accuracy to be achieved for both absolute and differential astrometry in its top-level requirements documents. Because of the complexities of different types of astrometric observations, these requirements cannot be used…

The mid-infrared (mid-IR) is a strategically important band for numerous applications ranging from night vision to biochemical sensing. Unlike visible or near-infrared optical parts which are commonplace and economically available…

The Fourier transform spectrometer (FTS) is a core instrument for solar observation with high spectral resolution, especially in the infrared. The Infrared System for the Accurate Measurement of Solar Magnetic Field (AIMS), working at 10-13…

Frequency upconversion technique offers an appealing approach for sensitive mid-infrared (MIR) imaging at room temperature. However, the spatial resolution of the upconversion imager has been notoriously restricted by the limited transverse…

Near-infrared (NIR) hyperspectral imaging is widely used to reveal morphological and chemical information. However, conventional spectral imagers usually rely on costly focal plane arrays and suffer from data redundancy and inefficiencies…

In this paper, we consider an intelligent reflecting surface (IRS)-aided single-user system where an IRS with discrete phase shifts is deployed to assist the uplink communication. A practical transmission protocol is proposed to execute…