相关论文: Fourier phase-demodulation applied to strip-light …
We describe a theoretical analysis and experimental set-up of a co-phased 360-degree fringe-projection profilometer. This 360-degree profilometer is built using 2-projections and 1-camera and can digitize discontinuous solids with diffuse…
Here we describe a co-phased 360-degree fringe-projection profilometer which uses 2-projectors and 1-camera and can digitize discontinuous solids with diffuse light surface. This is called co-phased because the two phase demodulated…
A phase-demodulation method for digital fringe-projection profilometry using the spatial and temporal Nyquist frequencies is presented. It allows us to digitize tridimensional surfaces using the highest spatial frequency ({\pi} radians per…
Microscopic fringe projection profilometry is a powerful 3D measurement technique with a theoretical measurement accuracy better than one micron provided that the measured targets can be imaged with good fringe visibility. However,…
Recent advances in imaging sensors and digital light projection technology have facilitated a rapid progress in 3D optical sensing, enabling 3D surfaces of complex-shaped objects to be captured with improved resolution and accuracy.…
Fringe projection profilometry has been increasingly sought and applied in dynamic three-dimensional (3D) shape measurement. In this work, a robust and high-efficiency 3D measurement based on Gray-code light is proposed. Unlike the…
Confining light to sharp metal tips has become a versatile technique to study optical and electronic properties far below the diffraction limit. Particularly near-field microscopy in the mid-infrared spectral range has found a variety of…
Fringe projection profilometry (FPP) has become increasingly important in dynamic 3-D shape measurement. In FPP, it is necessary to retrieve the phase of the measured object before shape profiling. However, traditional phase retrieval…
In this paper we apply the frequency transfer function (FTF) formalism to analyze the red, green and blue (RGB) phase-shifting fringe-projection profilometry technique. The phase-shifted fringe patterns in RGB fringe projection are…
It is a challenge for Phase Measurement Profilometry (PMP) to measure objects with a large range of reflectivity variation across the surface. Saturated or dark pixels in the deformed fringe patterns captured by the camera will lead to…
Diffusion models have demonstrated their utility as learned priors for solving various inverse problems. However, most existing approaches are limited to linear inverse problems. This paper exploits the efficient and unsupervised posterior…
In Fourier ptychography, multiple low resolution images are captured and subsequently combined computationally into a high-resolution, large-field of view micrograph. A theoretical image-formation model based on the assumption of plane-wave…
The Differential Fourier Holography (DFH) gives an exact mathematical solution of the inverse problem of diffraction in the Fraunhofer regime. After the first publication [1] the Differential Fourier Holography was successfully applied in…
Fourier ptychography microscopy (FPM), sharing its roots with synthetic aperture technique and phase retrieval method, is a recently developed computational microscopic super-resolution technique. By turning on the light-emitting diode…
Accurate and fast 3D imaging of specular surfaces still poses major challenges for state-of-the-art optical measurement principles. Frequently used methods, such as phase-measuring deflectometry (PMD) or shape-from-polarization (SfP), rely…
Structured light 3D surface imaging is a school of techniques in which structured light patterns are used for measuring the depth map of the object. Among all the designed structured light patterns, phase pattern has become most popular…
Fourier ptychographic microscopy (FPM) is a recently developed computational imaging technique for wide-field, high-resolution microscopy with a high space-bandwidth product. It integrates the concepts of synthetic aperture and phase…
Directed Energy Deposition (DED) is a metal additive manufacturing process capable of building and repairing large, complex metal parts from a wide range of alloys. Its flexibility makes it attractive for multiple industrial applications,…
This paper reviews two techniques that have been recently published for 3D profilometry and proposes one shot profilometry using iterative two-step temporal phase-unwrapping by combining the composite fringe projection and the iterative…
Fourier ptychography captures intensity images with varying source patterns (illumination angles) in order to computationally reconstruct large space-bandwidth-product images. Accurate knowledge of the illumination angles is necessary for…