相关论文: Design and fabrication of a 2.5T superconducting d…

Conceptual designs of a superconducting dipole magnet for a Storage Ring of a Muon Collider with a 1.5 TeV center of mass (c.o.m.) energy and an average luminosity of 10 34 cm-2s-1 are presented. In contrast to proton machines, the dipoles…

A 1.8 T dipole magnet using thin grain oriented silicon steel laminations has been constructed as a prototype for a muon synchrotron ramping at 400 Hz. Following the practice in large 3 phase transformers and our own Opera-2d simulations,…

High-temperature technical superconductors are potential candidates for compact and high-field tokamak magnets. The demand for higher fusion power can be met with an on-axis high magnetic field due to toroidal magnets. An R&D activity has…

A conduction-cooled superconducting magnet producing a transverse field of 4 Tesla has been designed for the new generation multi-field coupling measurement system, which was used to study the mechanical behavior of superconducting samples…

The mathematical foundation is laid for a relatively new type of magnets generating uniform transverse field - tilted coil magnets. These consist of concentric nested solenoidal coils with elliptical turns tilted at a certain angle to the…

This paper is about the mechanical design of superconducting accelerator magnets. First, we give a brief review of the basic concepts and terms. In the following sections, we describe the particularities of the mechanical design of…

This paper presents the design concept of the dipole magnet with 50 mm aperture, 20 T nominal field and 13% margin based on a six-layer cos-theta (CT) hybrid coil design. Due to the high stresses and strains in the coil at high field,…

We describe the construction of a prototype hybrid permanent magnet dipole and quadruple. The magnet consists of two concentric rings of SmCo magnetic material 5 cm in length. The outer ring is made of 16 uniformly magnetized blocks…

Conceptual designs of superconducting magnets for the storage ring of a Muon Collider with a 1.5 TeV c.o.m. energy and an average luminosity of 10 34 cm-2s-1 are presented. All magnets are based on Nb3Sn superconductor and designed to…

Superconducting solenoid magnet prototype for ADS Injection I had been designed and fabricated, and also had been tested in liquid Helium state inside a vertical Dewar in Haerbin institute of Technology in Nov. 2012. The design current is…

There were designed and successfully tested at Fermilab several high temperature superconducting (HTS) model magnets for particle accelerators. Some of them worked in a persistent current mode continuously generating magnetic field in the…

In this paper we discuss the main principles of magnetic design for superconducting magnets (dipoles and quadrupoles) for particle accelerators. We give approximated equations that govern the relation between the field/gradient, the current…

The conceptual design study of a Future Circular hadron-hadron Collider (FCC-hh) with a center-of-mass energy of the order of 100 TeV, assumed to be constructed in a new tunnel of 80-100 km circumference, includes the determination of the…

The increase of energy in accelerators over the past decades has led to the design of superconducting magnets for both accelerators and the associated detectors. The use of Nb-Ti superconducting materials allows an increase in the dipole…

A single aperture Canted-Cosine-Theta (CCT) quadrupole magnet, made of NbTi superconductors, has been developed for the final focus region of the FCC-ee study. The conductor layout is optimised to mitigate edge effects on one of the two…

High temperature superconducting dynamos are capable of low loss contactless pumping large dc currents into superconducting magnet coils. We present a model of such devices and use efficient numerical methods for computing the…

Availability of 20 T operational field dipole magnets would open the way for a 16.5 TeV beam energy accelerator in the LHC tunnel. Here we discuss the main issues related to the magnet design of this extremely challenging dipole: main…

Superconductivity allows to construct and operate magnets at field values beyond 2 Tesla, the practical limitation of normal-conducting magnets exploiting ferro-magnetism. The field of superconducting magnets is dominated by the field…

The CMS magnetic system consists of a super-conducting solenoid coil, 12.5 m long and 6 m free bore diameter, and of an iron flux-return yoke, which includes the central barrel, two end-caps and the ferromagnetic parts of the hadronic…

The cryomodule I for ADS Injection-I had been designed, fabricated and online tested. The CM1 contains seven superconducting magnets, seven superconducting spoke cavities and seven beam position monitors. The superconducting magnet, which…