相关论文: An RFQ Direct Injection Scheme for the IsoDAR High…
The IsoDAR cyclotron is a 60 MeV cyclotron designed to output 10mA of protons in order to be a driver for a neutrino experiment. Coupling the high flux generated by the IsoDAR system with a kiloton neutrino detector will provide sterile…
In recent years, the interest in high intensity proton beams in excess of several milli-Amperes has risen. Potential applications are in neutrino physics, materials and energy research, and isotope production. Continuous wave proton beams…
In this paper we present the development of a simulation code capable of optimizing the geometry of a spiral inflector designed for axial injection into a cyclotron. To do this, an electric field map of the device is generated by utilizing…
Recently, the use of $\mathrm{H}_2^+$ ions instead of protons to overcome space charge challenges in compact cyclotrons has received much attention. This technique has the potential to increase the available beam current from compact…
IsoDAR is an experiment under development to search for sterile neutrinos using the isotope Decay-At-Rest (DAR) production mechanism, where protons impinging on $^9$Be create neutrons which capture on $^7$Li which then beta-decays producing…
This technical report reviews the tests performed at the Best Cyclotron Systems, Inc. facility in regards to developing a cost effective ion source, beam line transport system, and acceleration system capable of high H$_2^+$ current output…
This Preliminary Design Report (PDR) describes the IsoDAR electron-antineutrino source in two volumes which are mostly site-independent and describe the cyclotron driver providing a 60 MeV, 10 mA proton beam (this Volume); and the medium…
The IsoDAR collaboration is developing a high-current cyclotron for a neutrino search experiment. Designed to deliver 10 mA of 60 MeV protons, the current and power of this cyclotron far exceed those of existing accelerators, opening new…
Using H2+ ions is expected to mitigate the two major impediments to accelerating very high currents in cyclotrons, due to lower space charge at injection, and stripping extraction. Planning for peak currents of 10 particle milliamps at 800…
We are developing a high-current cyclotron as a driver for the IsoDAR neutrino experiment. It accelerates 5 mA H2+ to 60 MeV/amu, after which the electron is removed to produce a 10 mA, 60 MeV proton beam. The enabling innovations that…
Recent ion source developments resulted in the generation of high brilliance, high current beams of protons and light ions. After extraction and transport the beams with large internal space charge forces have to be captured, bunched and…
The IsoDAR sterile-neutrino search requires a very high intensity neutrino source. For IsoDAR, this high intensity is produced using the high neutron flux from a 60 MeV, 10 mA proton beam striking a beryllium target that floods a sleeve of…
High gradient accelerator injectors have been widely studied throughout the world-leading accelerator facilities. The demand for high frequency cavities have led the Detector, Accelerator and instrumentation laboratory (KAHVELab) in…
At the Holifield Radioactive Ion Beam Facility (HRIBF) at Oak Ridge National Laboratory (ORNL), molecular ions extracted from a positive ion source and subsequently broken up in a charge exchange cell produce Radioactive Ion Beams (RIBs)…
To enhance the quality of pulsed cold ion beams extracted from the two cryogenic stopping cells at FAIR (i.e., the one currently used in the FRS and the one under development for the Super-FRS at FAIR), we propose using a novel gas-dynamic…
IsoDAR seeks to place a high-power-cyclotron and target combination, as an intense source of $\bar{\nu}_e$ at the level of $\sim 10^{23}$/year, close to a kiloton-scale neutrino detector in order to gain sensitivity to very short-baseline…
New high current accelerator facilities like proposed for HIDIF or ESS require a beam with a high brilliance. These beams can not be produced by a single pass rf-linac. The increase in brightness in such a driver linac is done by several…
Several experimental collaborations worldwide intend to test sterile neutrino models by measuring the disappearance of antineutrinos produced via isotope decay at rest (IsoDAR). The most advanced of these proposals have very similar setups,…
The superconducting (SC) High Intensity and Energy (HIE) ISOLDE linac will replace most of the existing accelerating infrastructure of the Radioactive ion beam EXperiment (REX) at CERN, however, the 101.28 MHz RFQ and 5 MV IH cavity will…
This Preliminary Design Report (PDR) describes the IsoDAR electron-antineutrino source in two volumes which are mostly site-independent and describe the cyclotron driver providing a 60 MeV, 10 mA proton beam (Volume I); and the medium…