相关论文: Self-referencing a continuous-wave laser with elec…
We demonstrate an optical frequency comb based on an erbium-doped-fiber femtosecond laser with the nonlinear polarization evolution scheme. The repetition rate of the laser is about 209 MHz. By controlling an intra-cavity electro-optic…
We report on the characterization of a commercial-core fiber-based frequency comb equipped with an intracavity electro-optic modulator (EOM). We investigate the relationship between the noise of the pump diode and the laser relative…
We discuss a simple, linear, zero-delay implementation of spectral shearing interferometry for amplitude and phase characterization of optical frequency comb sources and arbitrary waveforms. We demonstrate this technique by characterizing…
The comb-like spectrum added to laser light by an electro-optic modulator (EOM) finds use in a wide range of applications, including coherent optical communication, atomic spectroscopy, and laser frequency and phase stabilization. In some…
We present a method of phase-locking any number of continuous-wave lasers to an optical frequency comb (OFC) that enables independent frequency positioning and control of each laser while still maintaining lock to the OFC. The scheme…
Electro-optical modulation of a continuous wave laser is a highly stable way to generate frequency combs, gaining popularity in telecommunication and spectroscopic applications. These combs are generated by modulating non-linear…
Self-referencing turns pulsed laser systems into self-referenced frequency combs. Such frequency combs allow counting of optical frequencies and have a wide range of applications. The required optical bandwidth to implement self-referencing…
Femtosecond frequency combs have boosted progress in various fields of precision metrology. Nevertheless, demanding applications such as front-end frequency and time standards, ultrastable microwave generation or high-resolution…
We utilize silicon-nitride waveguides to self-reference a telecom-wavelength fiber frequency comb through supercontinuum generation, using 11.3 mW of optical power incident on the chip. This is approximately ten times lower than…
The measurement and stabilization of the carrier-envelope offset frequency $f_{\textrm{CEO}}$ via self-referencing is paramount for optical frequency comb generation which has revolutionized precision frequency metrology, spectroscopy, and…
We demonstrate a 1.4 W continuous wavelength (CW) laser at 243.1 nm. The radiation is generated through frequency quadrupling the output of a ytterbium-doped fiber amplifier system which produces $>$ 10 W of CW power at 972.5 nm. We…
Continuous-wave (cw) squeezed states of light have applications in sensing, metrology and secure communication. In recent decades their efficient generation has been based on parametric down-conversion, which requires pumping by externally…
We present a hybrid fiber/waveguide design for a 100-MHz frequency comb that is fully self-referenced and temperature controlled with less than 5 W of electrical power. Self-referencing is achieved by supercontinuum generation in a silicon…
Optical frequency combs are an essential tool for precision metrology experiments ranging in application from remote spectroscopic sensing of trace gases to the characterization and comparison of optical atomic clocks for precision…
Phase coherently linking optical to radio frequencies with femtosecond mode-locked laser frequency combs enabled counting the cycles of light and is the basis of optical clocks, absolute frequency synthesis, tests of fundamental physics,…
Dissipative solitons formed in Kerr microresonators may enable chip-scale frequency combs for precision optical metrology. Here we explore the creation of an octave-spanning, 15-GHz repetition-rate microcomb suitable for both f-2f…
The phase information provided by the beat note between frequency combs and two continuous-wave lasers is used to extrapolate the phase evolution of comb modes found in a spectral region obtained via nonlinear broadening. This thereafter…
The remarkable precision of frequency comb (FC) lasers is transferred to the extreme ultraviolet (XUV, wavelengths shorter than 100 nm), a frequency region previously not accessable to these devices. A frequency comb at XUV wavelengths near…
Continuously and widely tunable lasers actively stabilized on a frequency reference are broadly employed in atomic, molecular and optical (AMO) physics. The frequency-stabilized optical frequency comb (OFC) provides a novel optical…
We report an all-polarization-maintaining fiber optic approach to generating sub-2 cycle pulses at 2 {\mu}m and a corresponding octave-spanning optical frequency comb. Our configuration leverages mature Er:fiber laser technology at 1.5…