相关论文: Segregation, precipitation, and \alpha-\alpha' pha…
The iron-chromium alloy and its derivatives are widely used for their remarkable resistance to corrosion, which only occurs in a narrow concentration range around 9 to 13 atomic percent chromium. Although known to be due to chromium…
The energy of segregation of Cr from the bulk to the topmost surface layer in dilute Fe-Cr alloys is endothermic but small. On the other hand, the segregation energy from the bulk to the subsurface layer is not only endothermic but…
Kinetics of homogeneous nucleation and growth of copper precipitates under electron irradiation of Fe_{1-x}Cu_x alloys at concentrations x from 0.06 at.% to 0.4 at.% and temperatures T from 290 to 450C is studied using the kinetic Monte…
The earlier-developed ab initio model and the kinetic Monte Carlo method (KMCM) are used to simulate precipitation in a number of iron-copper alloys with different copper concentrations x and temperatures T. The same simulations are also…
Tungsten-based low-activation high-entropy alloys are possible candidates for next-generation fusion reactors due to their exceptional tolerance to irradiation, thermal loads, and stress. We develop an accurate and efficient machine-learned…
The early stage of the chromium precipitation in copper was analyzed at the atomic scale by Atom Probe Tomography (APT). Quantitative data about the precipitate size, 3D shape, density, composition and volume fraction were obtained in a…
The segregation behavior of Cr in dilute Fe-Cr alloys is known to be anomalous since the main barrier for surface segregation of Cr in these alloys arises not from the topmost surface layer but from the subsurface layer where the solution…
We describe a technique for constraining macroscopic fluctuations in thermodynamic variables well-suited for Monte Carlo (MC) simulations of multiphase equilibria. In particular for multicomponent systems this amounts to a statistical…
To enable accurate molecular dynamics simulations of iron-chromium alloys with surfaces, we develop, based on density-functional-theory (DFT) calculations, a new interatomic Fe-Cr potential in the Tersoff formalism. Contrary to previous…
Compositionally complex alloys or concentrated solid solutions are the latest frontier in catalyst design, but mixing different elements in one catalyst may result in surface segregation. Atomistic simulations can predict segregation…
Phase separation in strained and strain-free samples of Fe84.85Cr15.15 induced by an isothermal annealing at 402 deg C up to 3888 h was studied by means of the Mossbauer spectroscopy. The measured Fe-site spectra were analyzed with two…
This work is motivated by the need for large-scale simulations to extract physical information on the iron-chromium system that is a binary model alloy for ferritic steels used or proposed in many nuclear applications. From first-principles…
Mn enrichment at dislocations in Fe-Mn alloys due to segregation and spinodal decomposition along the dislocation line is studied via modeling and experimental characterization. To model these phenomena, both finite-deformation microscopic…
Ferritic steels possibly strengthened by oxide dispersion are candidates as structural materials for generation IV and fusion nuclear reactors. Their use is limited by incomplete knowledge of the iron-chromium phase diagram at low…
Radiation-enhanced precipitation of Cr-rich {\alpha}' in irradiated Fe-Cr alloys, which results in hardening and embrittlement, depends on the irradiating particle and the displacement per atom (dpa) rate. Here, we utilize a Cahn-Hilliard…
Kinetics of phase decomposition accompanied by precipitation of sigma-phase in a Fe73.7Cr26.3 alloy isothermally annealed at 832 K was studied by means of M\"ossbauer spectroscopy. Two stage decomposition process has been revealed by three…
Segregation of impurities to grain boundaries plays an important role in both the stability and macroscopic behavior of polycrystalline materials. The research objective in this work is to better characterize the energetics and length…
Zr and Sc precipitate in aluminum alloys to form the Al\_3Zr\_xSc\_{1-x} compound which, for low supersaturations of the solid solution, exhibits the L1\_2 structure. The aim of the present study is to model at an atomic scale the kinetics…
We present an extension of the semi-grandcanonical (SGC) ensemble that we refer to as the variance-constrained semi-grandcanonical (VC-SGC) ensemble. It allows for transmutation Monte Carlo simulations of multicomponent systems in…
Extensive first-principle calculations on embedded clusters containing few O, Y, Ti, and Cr atoms as well as vacancies are performed to obtain interaction parameters to be applied in Metropolis Monte Carlo simulations, within the framework…