相关论文: Study of a MA-loaded cavity for compact synchrotro…
RF cavities loaded with magnetic alloy (MA) or ferrite ring cores are used in synchrotrons and storage rings if the maximum RF frequency is in the order of a few MHz. A simple model for the description of cavities of this type is derived.…
For selecting the properly magnetic alloy (MA) material to load the RF compression cavity, the measurement of the MA cores which is produced by Liyuan Company has been carried out at IMP. We measured 4 kinds of MA core materials, type V1,…
The China Spallation Neutron Source (CSNS) beam power was successfully reached 125 kW with a low beam loss in February 2022. In order to increase beam power, during the summer in 2022, we employ magnetic-alloy (MA) cavity in the rapid…
Vapor-cell devices based on microwave interrogation provide a stable frequency reference with a compact and robust setup. Further miniaturization must focus on optimizing the physics package, containing the microwave cavity and atomic…
The upgrade plan of the China Spallation Neutron Source aims to enhance the beam power from 100 kW to 500 kW. To achieve this, the plan involves incorporating three new magnetic alloy cavities while maintaining the existing system to enable…
The microwave cavity experiment is the most sensitive way of looking for axions in the 0.1-10 GHz range, corresponding to masses of 0.5 - 40 $\mu$eV. The particular challenge for frequencies greater than 5 GHz is designing a cavity with a…
Superconducting cavities with low RF frequencies and heavy damping of higher order modes (HOM) are desired for the main accelerator of High Energy Photon Source (HEPS), a 6 GeV synchrotron light source promising ultralow emittance currently…
An 805 MHz RF pillbox cavity has been designed and constructed to investigate potential muon beam acceleration and cooling techniques for a Muon Collider or Neutrino Factory. The cavity can operate in vacuum or under pressure to 100…
One superconducting taper-type half-wave resonator (HWR) with frequency of 162.5MHz, \b{eta} of 0.09 has been developed at Peking University, which is used to accelerate high current proton ($\sim$ 100mA) and $D^{+}$($\sim$ 50mA). The radio…
A 1.8 T dipole magnet using thin grain oriented silicon steel laminations has been constructed as a prototype for a muon synchrotron ramping at 400 Hz. Following the practice in large 3 phase transformers and our own Opera-2d simulations,…
A buncher cavity has been developed for the muons accelerated by a radio-frequency quadrupole linac (RFQ). The buncher cavity is designed for $\beta=v/c=0.04$ at an operational frequency of 324 MHz. It employs a double-gap structure…
In an effort to extend the usefulness of microwave cavity detectors to higher axion masses, above ~8 $\mu$eV (~2 GHz), a numerical trade study of cavities was conducted to investigate the merit of using variable periodic post arrays and…
A research complex for aerospace radiation effects research has been proposed in Harbin Institute of Technology. Its core part is a proton accelerator complex, which consists of a 10 MeV injector, a 300 MeV synchrotron and beam transport…
Several experimental implementations of cavity-magnon systems are presented. First an Yttrium Iron Garnet (YIG) block is placed inside a re-entrant cavity where the resulting hybrid mode is measured to be in the ultra strong coupling…
A 4600 Hz pulsed synchrotron is considered as a means of accelerating cool muons with superconducting RF cavities from 4 to 20 GeV/c for a neutrino factory. Eddy current losses are held to less than a megawatt by the low machine duty cycle…
Using the China Spallation Neutron Source (CSNS) linac as the injector, a 500 MeV proton synchrotron is proposed for multidisciplinary application, such as biology, material and proton therapy. The synchrotron will deliver proton beam with…
The China Accelerator Driven Sub-critical System (CADS) is a high intensity proton facility to dispose of nuclear waste and generate electric power. CADS is based on 1.5GeV, 10mA CW superconducting (SC) linac as a driver. The high-energy…
There is great need for high intensity proton beams from compact particle accelerators in particle physics, medical isotope production, and materials- and energy-research. To address this need, we present, for the first time, a design for a…
We present results of systematic fully relativistic first-principles calculations of the uniaxial magnetic anisotropy energy (MAE) of a disordered and partially ordered tetragonal Fe-Co alloy using the coherent potential approximation…
A 325 MHz aluminum prototype of a spatially periodic rf quadrupole focusing linac was developed at the Institute of Modern Physics, Chinese Academy of Sciences, as a promising candidate for the front end of a high-current linac. It consists…