相关论文: A 10-100 GHz Coax To Double-Ridged Waveguide Launc…
We report on the design, fabrication and testing of a set of high performance corrugated feed horns at 30 GHz, 70 GHz and 100 GHz, built as advanced prototypes for the Low Frequency Instrument (LFI) of the ESA Planck mission. The…
A multi-beam antenna with a dual band operation in the 28 GHz and 31 GHz millimeter wave band is presented. The antenna has a gain of around 15 dBi in each of the three ports. The spatial footprint of the antenna is 166 mm x 123 mm x 34 mm.…
This research study introduces a novel small antenna with wideband capacity for the higher frequency range. As a possible contender for 6G wireless networks, the proposed antenna is designed to target the 6G Millimeter-Wave (mmWave)…
The corrugated horn is a high performance feed often used in radio telescopes. There has been a growing demand for wideband optics and corrugated horns in millimeter and submillimeter-wave receivers. It improves the observation efficiency…
In this paper, a wideband high-gain 2 ? 2-element subarray is presented for 60 GHz band applications. The antenna is fed with waveguide-fed cavity backed configuration and designed entirely via simple rectangular apertures. To improve…
Millimeter-wave superconducting resonators are a useful tool for studying quantum device coherence in a new frequency domain. However, improving resonators is difficult without a robust and reliable method for coupling millimeter-wave…
A key challenge in developing terahertz front-ends is achieving high coupling efficiency between the waveguide feed horn and the optical beam. In this paper, we have quantified the alignment requirements for the widely used E-plane split…
This project presents the design, simulation, and fabrication of a compact dual-band patch antenna using a stacked structure, targeting 2.25 to 2.35 GHz and 5.6 to 5.8 GHz ISM bands. A stacked configuration was chosen over a slotted design…
This study proposes a 3D-printed, quad-ridged, dual-pol, flared horn antenna feeder to meet the demands of a modern radio-telescope. The research work presented in this paper involves both the theoretical and the customized / adapted…
This paper presents the design of a dual band rectangular Dielectric Resonator Antenna (DRA) coupled to narrow slot aperture that is fed by microstrip line. The fundamental TE111 mode and higher-order TE113 mode are excited with their…
We have developed and tested a doubly tunable resonator, with the intention to simulate fast motion of the resonator boundaries in real space. Our device is a superconducting coplanar-waveguide half-wavelength microwave resonator, with…
A pre-requisite for the design of wireless systems is the understanding of the propagation channel. While a wealth of propagation knowledge exists for bands below 6 GHz, the same can not be said for bands approaching millimeter-wave…
The design, simulation and measurement of a beam steerable slotted waveguide antenna operating in X band are presented. The proposed beam steerable antenna consists of a standard rectangular waveguide (RWG) section with longitudinal slots…
Two basic designs have been developed for waveguide hybrids, or 3-dB couplers, capable of handling hundreds of megawatts at X-band. Coupling is provided by one or two connecting waveguides with h-plane junctions and matching elements. In…
A novel and compact dual band planar antenna for 2.4/5.2/5.8-GHz wireless local area network(WLAN) applications is proposed and studied in this paper. The antenna comprises of a T-shaped and a F-shaped element to generate two resonant modes…
A novel mm-wave microstrip-fed patch antenna with broad bandwidth and wide angular coverage suitable for integration in planar arrays is designed, analyzed and verified by measurements. The antenna provides a bandwidth of 13.1% between 34.1…
Mapping the polarization of the Cosmic Microwave Background is yielding exciting data on the origin of the universe, the reionization of the universe, and the growth of cosmic structure. Kilopixel arrays represent the current state of the…
Propagation channel characteristics are substantially different in sub-6 GHz and millimeter-wave (mmWave) bands. A typical mmWave link experiences more than an order-of-magnitude larger path loss and is more susceptible to blockages than a…
In this paper, we present a novel real-time multiple-input-multiple-output (MIMO) channel sounder for the 28 GHz band. Until now, most investigations of the directional characteristics of millimeter-wave channels have used mechanically…
Waveguide directional couplers working at 5.712/11.9924 GHz are developed. Even holes symmetrical to the structure are drilled along the central line of the narrow-wall of waveguide, which are used to couple the electromagnetic power from…