相关论文: Design of A Conduction-cooled 4T Superconducting R…
We report results of the experimental test of the High Temperature Superconductor based fast cycling prototype accelerator magnet capable to operate up to about 300 Tesla per second field ramping rate with some 0.5 T field in the magnet…
Several coil structures have been used in accelerator superconducting quadrupole magnets, and cos2{\theta} quadrupole magnets are the most mature in theoretical research and engineering applications. However, the cos2{\theta} quadrupole…
A racetrack coil using MgB2/Cu strand has been fabricated and tested for transport current density at 4.2 K in self field. The monofilamentary strand was 1.0 mm OD and insulated with S-glass braid. Eighty turns of strand (42 m) were wound…
This paper summarizes our work on the fabrication, characterization, and modeling of a high-temperature superconducting double racetrack (DRC) coil. Using an in-house developed winding system, a DRC was wound with ReBCO superconducting…
Within the framework of the National Special Project for Magnetic Confined Nuclear Fusion Energy of China, the design of a superconducting magnet project as a test facility of the Nb3Sn coil or NbTi coil for the Chinese Fusion Engineering…
High-temperature technical superconductors are potential candidates for compact and high-field tokamak magnets. The demand for higher fusion power can be met with an on-axis high magnetic field due to toroidal magnets. An R&D activity has…
The design of superconducting applications containing windings of superconducting wires or tapes requires electro-thermal quench modelling. In this article, we present a reliable numerical method based on a variational principle and we…
A single aperture Canted-Cosine-Theta (CCT) quadrupole magnet, made of NbTi superconductors, has been developed for the final focus region of the FCC-ee study. The conductor layout is optimised to mitigate edge effects on one of the two…
This paper describes a new design of superconducting dipole magnet prototype by the use of tilted solenoids. The magnet prototype, which consists of four layers of superimposed tilted solenoids with operating current of 3708 A, will produce…
The cryomodule I for ADS Injection-I had been designed, fabricated and online tested. The CM1 contains seven superconducting magnets, seven superconducting spoke cavities and seven beam position monitors. The superconducting magnet, which…
There is an interest to design superconducting magnet systems working in a persistent current mode. These systems continuously generate magnetic field with disconnected power source working like permanent magnet devices. In this paper…
High temperature superconducting (HTS) tape can be cut and stacked to generate large magnetic fields at cryogenic temperatures after inducing persistent currents in the superconducting layers. A field of 17.7 T was trapped between two…
Superconductivity allows to construct and operate magnets at field values beyond 2 Tesla, the practical limitation of normal-conducting magnets exploiting ferro-magnetism. The field of superconducting magnets is dominated by the field…
A 2D electromagnetic-thermal coupled numerical model has been developed using the finite element method and validated against experimental data to investigate a superconducting machine featuring high-temperature superconducting (HTS) tape…
A tunable magnetic field at low temperatures is essential for numerous applications, including spintronics, magnetic resonance imaging, and condensed matter physics. While commercial superconducting vector magnets are available, they are…
This paper is about the mechanical design of superconducting accelerator magnets. First, we give a brief review of the basic concepts and terms. In the following sections, we describe the particularities of the mechanical design of…
The mathematical foundation is laid for a relatively new type of magnets generating uniform transverse field - tilted coil magnets. These consist of concentric nested solenoidal coils with elliptical turns tilted at a certain angle to the…
We performed thermal conductivity measurements on a single crystal of the ferromagnetic superconductorUCoGe under magnetic field. Two different temperature dependencies of the thermal conductivity are observed, for H//b linear at low…
The conductor on round core (CORC) cable is one of the major high temperature superconductor cable concepts combining scalability, flexibility, mechanical strength, ease of fabrication and high current density; making it a possible…
We fabricated a compact (13$\times$12$\times$12.5 mm${^3}$) trapped-field magnet by stacking 200 pieces of EuBa${_2}$Cu${_3}$O${_7}$ coated conductors with BaHfO${_3}$ nanorods as artificial pinning centers. It was magnetized by…