相关论文: Development and validation of a transition model b…
Turbulence modeling has the potential to revolutionize high-speed vehicle design by serving as a co-equal partner to costly and challenging ground and flight testing. However, the fundamental assumptions that make turbulence modeling such…
Simulations of turbulent flows in 3D are one of the most expensive simulations in computational fluid dynamics (CFD). Many works have been written on surrogate models to replace numerical solvers for fluid flows with faster, learned,…
The objective of this work is to investigate the unexplored laminar-to-turbulent transition of a heated flat-plate boundary layer with a fluid at supercritical pressure. Two temperature ranges are considered: a subcritical case, where the…
A quasi-linear reduced transport model is developed from a database of high-$\beta$ electromagnetic nonlinear gyrokinetic simulations performed with Spherical Tokamak for Energy Production (STEP) relevant parameters. The quasi-linear model…
The laminar-to-turbulent transition remains a fundamental and enduring challenge in fluid mechanics. Its complexity arises from the intrinsic nonlinearity and extreme sensitivity to external disturbances. This transition is critical in a…
Due to the thick boundary layers in hypersonic flows, the state of the boundary layer significantly influences the whole flow field as well as surface heat loads. Hence, for engineering applications the efficient numerical prediction of…
We have designed 3D numerical simulations of a soft spheres model, with size polidispersity and in athermal conditions, to study the transient shear banding that occurs during yielding of jammed soft solids. We analyze the effects of…
In superfluid 3He-B mutual-friction damping of vortex-line motion decreases roughly exponentially with temperature. We record as a function of temperature and pressure the transition from regular vortex motion at high temperatures to…
Self-consistent full-size turbulent-transport simulations of the divertor and SOL of existing tokamaks have recently become feasible. This enables the direct comparison of turbulence simulations against experimental measurements. In this…
SAM, a plant-level system analysis tool for advanced reactors (SFR, LFR, MSR/FHR) is under development at Argonne. As a modern system code, SAM aims to improve the predictions of 3D flows relevant to reactor safety during transient…
Some data of the drift current, Ud, measured on a wavy surface of water in a laboratory and the field, are briefly described. Empirical formulas for Ud are given, and their incompleteness is noted, regarding to absence of the drift current…
Accurate prediction of hypersonic flow fields over a compression ramp is critical for aerodynamic design but remains challenging due to the scarcity of experimental measurements such as velocity. This study systematically develops a data…
In this work, an efficient physics-constrained deep learning model is developed for solving multiphase flow in 3D heterogeneous porous media. The model fully leverages the spatial topology predictive capability of convolutional neural…
Direct numerical simulations of turbulent flow in a channel with one rigid and one viscoelastic wall are performed. An Eulerian-Eulerian model is adopted with a level-set approach to identify the fluid-compliant material interface. Focus is…
The present research proposes a new memory-efficient method using diffusion models to inject turbulent inflow conditions into Large Eddy Simulation (LES) and Direct Numerical Simulation (DNS) for various flow problems. A guided diffusion…
Accurate simulation of turbulent flow with separation is an important but challenging problem. In this paper, a data-driven Reynolds-averaged turbulence modeling approach, field inversion and machine learning is implemented to modify the…
A central obstacle to understanding the route to turbulence in wall-bounded flows is that the flows are composed of complex, highly fluctuating, and strongly nonlinear states. In the case of pipe flow, models have deepened our understanding…
The transition to turbulence in flows where the laminar profile is linearly stable requires perturbations of finite amplitude. "Optimal" perturbations are distinguished as extrema of certain functionals, and different functionals give…
Simulating turbulent flows is crucial for a wide range of applications, and machine learning-based solvers are gaining increasing relevance. However, achieving temporal stability when generalizing to longer rollout horizons remains a…
One-dimensional models are presented for transitional shear flows. The models have two variables corresponding to turbulence intensity and mean shear. These variables evolve according to simple equations based on known properties of…