相关论文: Performance Comparison Between MIMO and SISO based…

To deal with the ever increasing data rate demand in wireless systems, suitable backhaul solutions have to be found. One option is to use LOS MIMO systems at mmWave frequencies, as high bandwidths and spectral efficiencies will be able to…

Massive MIMO is bringing significant performance improvements in the context of outdoor macrocells, such as favourable propagation conditions, spatially confined communication, high antenna gains to overcome pathloss, and good angular…

We consider the problem of maximizing the harvested power in Multiple Input Multiple Output (MIMO) Simultaneous Wireless Information and Power Transfer (SWIPT) systems with power splitting reception. Different from recently proposed…

The benefit of multi-antenna receivers is investigated in wireless ad hoc networks, and the main finding is that network throughput can be made to scale linearly with the number of receive antennas nR even if each transmitting node uses…

Wireless Fidelity (Wi-Fi) communication technologies hold significant potential for realizing the Industrial Internet of Things (IIoT). In this paper, both Single-Input Single-Output (SISO) and polarized Multiple-Input Multiple-Output…

In this paper, we study the downlink performance of two important 5G network architectures, i.e. massive multiple-input multiple-output (M-MIMO) and small-cell densification. We propose a comparative modeling for the two systems, where the…

In this paper, a rigorous link performance test for MIMO OTA (multiple-input-multiple-output over-the-air) characterisation with traceable signal-to-interference-plus-noise ratio (SINR) is presented. Measurements were made with three…

3-dimensional Multiple-Input Multiple-Output (3D MIMO) systems have received great interest recently because of the spatial diversity advantage and capability for full-dimensional beamforming, making them promising candidates for practical…

Massive multiple-input multiple-output (MIMO) systems have been drawing considerable interest due to the growing throughput demands on wireless networks. In the uplink, massive MIMO systems are commonly studied assuming that each base…

Spatial diversity technique enables improvement in quality and reliability of wireless link. Antenna diversity along with understanding effects of channel on transmitted signal and methods to overcome the channel impairment plays an…

In this paper, a comprehensive study has been made to evaluate the performance of a MISO wireless communication system. The 4-by-1 spatially multiplexed Turbo encoded system under investigation incorporates Quasi-orthogonal space-time block…

The performance of centralized and distributed massive MIMO deployments are analyzed for indoor office scenarios. The distributed deployments use one of the following precoding methods: (1) local precoding with local channel state…

The performance of simultaneous wireless information and power transfer (SWIPT) in downlink (DL) cell-free massive multiple-input multiple-output (MIMO) is investigated. Tight approximations to the DL harvested energy and the DL/uplink (UL)…

To improve the cellular energy efficiency, without sacrificing quality-of-service (QoS) at the users, the network topology must be densified to enable higher spatial reuse. We analyze a combination of two densification approaches, namely…

In this paper, we study a massive multiple-input multiple-output (mMIMO) relay network where multiple source-destination pairs exchange information through a common relay equipped with a massive antenna array. The source users perform…

Massive MIMO (Multiple-Input Multiple-Output) is an advanced wireless communication technology, using a large number of antennas to improve the overall performance of the communication system in terms of capacity, spectral, and energy…

To support the high data rates for latency-critical applications, future wireless systems will employ fully digital beamforming multiple-input multiple-output (MIMO) architectures at millimeter wave (mmWave) frequencies. Moreover, mmWave…

In this work, a new energy-efficiency performance metric is proposed for MIMO (multiple input multiple output) point-to-point systems. In contrast with related works on energy-efficiency, this metric translates the effects of using finite…

In this letter, we consider a large-scale multiple-input multiple-output (MIMO) system where the receiver should harvest energy from the transmitter by wireless power transfer to support its wireless information transmission. The energy…

In this paper, we examine the fundamental trade-off between radiated power and achieved throughput in wireless multi-carrier, multiple-input and multiple-output (MIMO) systems that vary with time in an unpredictable fashion (e.g. due to…