相关论文: Status of the SPP RFQ project

"LUE200" - 200 MeV electron linac is being created at JINR as a driver of the pulsed neutron source "IREN" [1]. The special full-scale facilities for testing the main systems of LUE-200 (FSTF) are used at JINR, BINP, MEPhI and YerPhI [2].…

The Square Kilometre Array (SKA) project is an international effort to build the world's most sensitive radio telescope operating in the 50 MHz to 14 GHz frequency range. Construction of the SKA is divided into phases, with the first phase…

We report on the design and characterization of a high-power amplifier with an output power of 36.5 dBm for a frequency range of 50 MHz to 1000 MHz with a total gain of 40 dB. The amplifier is optimized for driving acousto-optic and…

Tsinghua University has designed an X-band (11.424 GHz) slow-wave parallel-coupling accelerating structure, and demonstrated the high performance of the over-coupled structure operating with ultrashort pulse. In this study, we redesigned a…

A timely and long-term programme of kaon decay measurements at an unprecedented level of precision is presented, leveraging the capabilities of the CERN Super Proton Synchrotron (SPS). The proposed HIKE programme is firmly anchored on the…

In this work we investigate a binned version of Quantum Phase Estimation (QPE) set out by [Somma 2019] and known as the Quantum Eigenvalue Estimation Problem (QEEP). Specifically, we determine whether the circuit decomposition techniques we…

The 325MHz, {\beta}=0.40 superconducting single spoke cavity (Spoke040) was one of the most challenges for the China-ADS (Accelerator Driven System) project. The design was finished, and the fabrication was in progressing. In this paper, we…

SPT-3G+ is the next-generation camera for the South Pole Telescope (SPT). SPT is designed to measure the cosmic microwave background (CMB) and the mm/sub-mm sky. The planned focal plane consists of 34,000 microwave kinetic inductance…

The technique of frequency phase transfer (FPT), enabled by multiband receivers with shared optical path (SOP), is set to become a true backbone of VLBI operations at frequencies above 22 GHz. The FPT has been successfully implemented at…

Peking University is developing a 1.3 GHz superconducting accelerating section for China Academy of Engineering Physics (CAEP) high power THz free-electron laser. A compact fast/slow tuner has developed by Institute of High Energy Physics…

Far-field wireless power transfer, based on radio frequency (RF) waves, came into the picture to fulfill the power need of large Internet of Things (IoT) networks, the backbone of the 5G and beyond era. However, RF communication signals…

The research note presents results of coupled RF and thermal simulation of a cryocooler conduction cooled 650 MHz SRF cavity made of bulk niobium and coated with Nb3Sn on the RF surface. The cavity is part of a particle accelerator design…

The scheme of the data acquisition (DAQ) architecture in High Energy Physics (HEP) experiments consist of data transport from the front-end electronics (FEE) of the online detectors to the readout units (RU), which perform online processing…

To cope with the higher occupancy and radiation damage at the HL-LHC also the LHC experiments will be upgraded. The ATLAS Planar Pixel Sensor R&D Project (PPS) is an international collaboration of 17 institutions and more than 80…

A compact adjustable focusing system for a 2 MeV H- RFQ Linac is designed, constructed and tested based on four permanent magnet quadrupoles (PMQ). A PMQ model is realised using finite element simulations, providing an integrated field…

Project-X is a leading candidate of the next major accelerator construction project at Fermilab. The mission need of Project-X is to establish an intensity frontier for particle physics research, or more precisely, to build a multi-MW…

We have developed high-efficiency normal-conducting RF accelerating structures by combining H-mode resonator cavities and a transverse beam focusing by permanent-magnet quadrupoles (PMQ), for beam velocities in the range of a few percent of…

The accelerator for the APT Project is a 100 mA CW proton linac with an output energy of 1030 MeV. A High Energy Beam Transport (HEBT) conveys the beam to a raster expander, that provides a large rectangular distribution at a target/blanket…

CEA/IRFM is conducting R\&D efforts in order to validate the critical RF components of the 5 GHz ITER LHCD system, which is expected to transmit 20 MW of RF power to the plasma. Two 5 GHz 500 kW BeO pill-box type window prototypes have been…

The off-frequency detune method is being considered for application in the LCLS-II-HE superconducting linac to produce multi-energy electron beams for supporting multiple undulator lines simultaneously [1]. Design of the tuner has been…