相关论文: Numerical evaluation of AC losses in an HTS insert…

For superconducting coils with many turns, it is widely believed that the magnetic field from magnetization currents is negligible compared to the one generated by the whole coil. This article shows that this is not true for coils with a…

The estimation of losses in high-temperature superconductors (HTS) is fundamental during the design of superconducting devices since losses can strongly influence the cooling system requirements and operating temperature. Typically, 2D…

Many applications, such as magnets and SMES, are usually charged and discharged under a bias DC current, which may increase the AC loss. For their design, it is necessary to understand and predict the AC loss. This article analises the AC…

In this paper, we introduce two complementary approaches for the accurate prediction of AC losses in large-scale low-temperature superconducting (LTS) magnets. These methods account for the temperature rise within the LTS coil and its…

Fully superconducting machines provide the high power density required for future electric aircraft propulsion. However, superconducting windings generate AC losses in AC electrical machine environments. These AC losses are difficult to…

The electromagnetic properties of a pancake coil in AC regime as a function of the number of turns is studied theoretically and experimentally. Specifically, the AC loss, the coil critical current and the voltage signal are discussed. The…

Numerical modeling of superconductors is widely recognized as a powerful tool for interpreting experimental results, understanding physical mechanisms and predicting the performance of high-temperature superconductor (HTS) tapes, wires and…

One of the main tasks during the design of a superconducting electrical machine is the estimation of losses in the superconducting coils. These losses can be decisive in such applications since they influence the cooling power requirements…

A noteworthy physical dependence of the hysteresis losses with the axial winding misalignment of superconducting racetrack coils made with commercial \textcolor{black}{Second Generation High Temperature Superconducting (2G-HTS)} tapes is…

A 2D electromagnetic-thermal coupled numerical model has been developed using the finite element method and validated against experimental data to investigate a superconducting machine featuring high-temperature superconducting (HTS) tape…

In this work we present a modeling tool designed to estimate the hysteretic losses in the coils of an electric generator with coils made of coated conductor tapes during transient operation. The model is based on a two-stage segregated…

The modeling and analysis of superconducting coils is an essential task in the design stage of most devices based on high-temperature superconductors (HTS). These calculations allow verifying basic estimations and assumptions, proposing…

Roebel cables made of HTS coated conductors can carry high currents with a compact design and reduced AC losses. They are therefore good candidates for manufacturing coils for HTS applications such as motors and generators. In this paper we…

This paper presents the alternating current (AC) loss analysis on high-temperature superconductor (HTS) Cross-Conductor (CroCo) cables, in order to evaluate whether they could be utilized for electrical power transmission. The modeling of…

Minimization of ac losses is essential for economic operation of high-temperature superconductor (HTS) ac power cables. A favorable configuration for the phase conductor of such cables has two counter-wound layers of HTS tape-shaped wires…

In this paper we derive the integral equations for radially and polygonally arranged high-temperature superconductor thin tapes and we solve them by finite-element method. The superconductor is modeled with a non-linear power law, which…

Modelling high temperature superconductor (HTS) motors remains challenging mainly due to the high aspect ratio of these conductors but also because of the properties of the magnetic materials. This paper presents a 2D time dependent model…

Field decay rate is the key characteristic of the superconducting magnets based on closed-loop coils. However, in Maglev trains or rotating machines, closed-loop magnets work in external AC fields and will exhibit an evidently accelerated…

A homogenization method to model a stack of second generation (2G) High Temperature Superconducting (HTS) tapes under AC applied transport current or magnetic field has been obtained. The idea is to find an anisotropic bulk equivalent for…

Screening currents caused by varying magnetic fields degrade the homogeneity and stability of the magnetic fields created by $RE$BCO coated conductor coils. They are responsible for the AC loss, which is also important for other power…