相关论文: Quench limits in the next generation of magnets

High field superconducting magnets using high temperature superconductors are being developed for high energy physics, nuclear magnetic resonance and energy storage applications. Although the conductor technology has progressed to the point…

The increase of energy in accelerators over the past decades has led to the design of superconducting magnets for both accelerators and the associated detectors. The use of Nb-Ti superconducting materials allows an increase in the dipole…

We take a comprehensive look at conductors used in superconducting magnets for the accelerator sector and explore the ramifications of the present marketplace for supply of conductor to future accelerator facilities. While there are…

Superconducting high field magnets have the capability to generate over 40 T, with multiple existing practical applications globally. However, at such high magnetic fields, these magnets are prone to rapid electrothermal quench which can…

Superconducting material enables fusion reactor magnet concepts to operate with current densities that would melt materials with non-zero resistance. The application of superconducting material is considered essential for net-positive power…

Superconductivity allows to construct and operate magnets at field values beyond 2 Tesla, the practical limitation of normal-conducting magnets exploiting ferro-magnetism. The field of superconducting magnets is dominated by the field…

Protecting a high temperature superconducting (HTS) magnet from a quench event is a challenging task. Because of the slow normal zone propagation velocity, the long reliable quench detection method by directly monitoring coil voltage may…

Conceptual designs of superconducting magnets for the storage ring of a Muon Collider with a 1.5 TeV c.o.m. energy and an average luminosity of 10 34 cm-2s-1 are presented. All magnets are based on Nb3Sn superconductor and designed to…

LHC still does not operate at full energy due to training features in magnets. Higher field practical superconductors (Nb3Sn) show much worse training behavior than NbTi. Most magnet performance issues relate to quenching, and it is this…

Superconducting magnet training is one of the accelerator related issues attracting attention due to significant operational costs and time budget associated to it. It is especially worrisome that magnets based on the next-generation Nb3Sn…

We use a recently developed quench protection heater modeling tool for an analysis of heater delays in superconducting high-field Nb3Sn accelerator magnets. The results suggest that the calculated delays are consistent with experimental…

This course introduces key aspects of superconducting magnet technology in accelerators: basic principles, superconducting materials (NbTi, Nb$_3$Sn, ReBCO), wire and cable architectures, and fabrication methods. Compared to copper or…

Manufacturing of superconducting magnet for accelerators is a quite complex process that is not yet fully industrialized. In this paper, after a short history of the evolution of the magnet design and construction, we review the main…

Within the framework of the National Special Project for Magnetic Confined Nuclear Fusion Energy of China, the design of a superconducting magnet project as a test facility of the Nb3Sn coil or NbTi coil for the Chinese Fusion Engineering…

In the years 2009-2013 the Large Hadron Collider (LHC) has been operated with the top beam energies of 3.5 TeV and 4 TeV per proton (from 2012) instead of the nominal 7 TeV. The currents in the superconducting magnets were reduced…

The present state of development of a series of industrial superconductors is reviewed in consideration of their future applications in high field accelerator magnets, with particular attention on the material aspect. The discussion is…

The most effective way to achieve very high collision energies in a circular particle accelerator is to maximize the field strength of the main bending dipoles. In dipole magnets using Nb-Ti superconductor the practical field limit is…

HTS has the potential of a game changer for many applications of superconductivity, not last in the field of particle accelerators and detectors. This paper explores the potential of HTS, with a focus on REBCO-coated conductors, in relation…

Future colliders will operate at increasingly high magnetic fields pushing limits of electromagnetic and mechanical stress on the conductor [1]. Understanding factors affecting superconducting (SC) magnet performance in challenging…

This note aims at understanding the maximum allowable temperature at the hot spot during a quench in Nb3Sn accelerator magnets, through the analysis of experimental results previously presented.