相关论文: Mechanical behavior of steels: from fundamental me…
A medium Mn steel of composition Fe-4.8Mn-2.8Al-1.5Si-0.51C (wt.\%) was processed to obtain two different microstructures representing two different approaches in the hot rolling mill, resulting in equiaxed vs. a mixed equiaxed and lamellar…
Metallic materials, especially steel, underpin transportation technologies. High-manganese twinning induced plasticity (TWIP) austenitic steels exhibit exceptional strength and ductility from twins, low-energy microstructural defects that…
Transformation induced plasticity (TRIP) behavior was studied in steel with composition Fe-0.07C-2.85Si-15.3Mn-2.4Al-0.017N that exhibited two TRIP mechanisms. The initial microstructure consisted of both {\epsilon}- and…
Twinning induced plasticity (TWIP) steels are high strength metallic materials with potential for structural components in e.g. automotive applications. However, they are prone to hydrogen embrittlement (HE) and galvanic corrosion. We…
A Twinning Induced Plasticity (TWIP) steel with a nominal composition of Fe-16.4Mn-0.9C-0.5Si-0.05Nb-0.05V was deformed to an engineering strain of 6\%. The strain around the deformation twins were mapped using the 4D-STEM technique. Strain…
Martensite damage in Dual-Phase (DP) steel has been studied extensively, yet, the exact deformation mechanisms that trigger or inhibit damage initiation remain mostly unexplored. Whereas generally assumed to be hard and brittle, lath…
High-manganese twinning-induced plasticity (TWIP) steels exhibit high strain hardening, high tensile strength, and high ductility, which make them attractive for structural applications. At low tensile strain rates, TWIP steels are prone to…
The outstanding mechanical properties of high-manganese steels (HMnS) are a result of their high strain-hardenability. That is facilitated by strong suppression of dynamic recovery, predominant planar glide, and the activation of additional…
The microstructural mechanisms governing energy storage during plastic deformation of twinning-induced plasticity (TWIP) steels remain insufficiently understood, particularly under conditions of strain localization. This study provides a…
There is growing interest in promoting deformation twinning for plasticity in advanced materials, as highly organized twin boundaries are beneficial to better strength-ductility combination in contrast to disordered grain boundaries.…
Interstitials (carbon and nitrogen) are crucial alloying elements for optimizing the mechanical performance of the twinning-induced plasticity (TWIP) steels in terms of the stacking fault energy (SFE). First-principles calculations have…
In this study, the effect of ferrite grain size on the mechanical properties and dislocation behavior of dual-phase (DP) steel is investigated using dislocation-based crystal plasticity finite element analysis. DP steel, composed of a soft…
Ferrites, magnetic materials primarily composed of iron oxides, exhibit diverse magnetic behaviors, including diamagnetism, paramagnetism, ferromagnetism, antiferromagnetism, ferrimagnetism, and superparamagnetism. This paper explores the…
Experimental findings in the literature reveal that DP steels with identical strength and composition, but different microstructures, exhibit inconsistent trends under either necking-controlled or damage-controlled ductility tests. A…
A novel medium Mn steel of composition Fe-12Mn-4.8Al-2Si-0.32C-0.3V was manufactured with 1.09 GPa yield strength, 1.26 GPa tensile strength and 54% elongation. The thermomechanical process route was designed to be industrially translatable…
Understanding the mechanism of martensitic transformation is of great importance in developing advanced high strength steels, especially TRansformation-Induced Plasticity (TRIP) steels. The TRIP effect leads to enhanced work-hardening rate,…
A metastable austenitic Fe-Cr-Ni steel was processed by selective laser melting with low power, resulting in nearly random crystallographic texture. In-situ tensile loading and neutron diffraction experiments were undertaken and the results…
The combined strengthening effects of grain refinement and high precipitated volume fraction (~6at.%) on the mechanical properties of FeSiTi alloy subjected to SPD processing prior to aging treatment were investigated by atom probe…
Titanium alloys are widely used in aerospace, biomedical, and energy applications owing to their high specific strength, corrosion resistance, and biocompatibility. Among them, $\alpha$-titanium alloys with a hexagonal close-packed (hcp)…
A new $\beta$-metastable Ti-alloy is designed with the aim to obtain a TWIP alloy but positioned at the limit between the TRIP/TWIP and the TWIP dominated regime. The designed alloy exhibits a large ductility combined with an elevated and…