相关论文: An Exploration of Advanced X-Divertors on ITER

With edge plasma code SOLS-ITER, we study four Snowflake (SF) configurations for an ITER-size tokamak, with toroidal magnetic field BT=5T, major radius R=5m and plasma current Ip=10MA. Our aim is to provide insights on SF divertor design…

Advanced divertors are magnetic geometries where a second X-point is added in the divertor region to address the serious challenges of burning plasma power exhaust. Invoking physical arguments, numerical work, and detailed model magnetic…

The Divertor Tokamak Test (DTT) facility will be equipped with in-vessel divertor coils able to locally modify the flux surfaces in the divertor region. When the first DTT divertor had not been selected, four in-vessel divertor coils were…

One of the first studies of MAST Upgrade divertor configurations with SOLPS5.0 are presented. We focus on understanding main prospects associated with the novel geometry of the Super-X divertor (SXD). This includes a discussion of the…

The XGC1 edge gyrokinetic code is used for a high fidelity prediction for the width of the heat-flux to divertor plates in attached plasma condition. The simulation results are validated against the empirical scaling $\lambda_q \propto…

In stellarators, achieving effective divertor configurations is challenging due to the three-dimensional nature of the magnetic fields, which often leads to chaotic field lines and fuzzy separatrices. This work presents a novel approach to…

Strong divertor baffling is a feature expected to have a number of advantages for core-edge integration in tokamaks, yet one which requires much more detailed and extensive study. In this work, the impacts of baffling on a hydrogenic plasma…

A potentially important feature in a divertor design for a high-power tokamak is an extended and expanded divertor leg. The upgrade to MAST will allow a wide range of such divertor leg geometries to be produced, and hence will allow the…

Power exhaust is one of the major challenges for a future fusion device. Applying a non-axisymmetric external magnetic perturbation is one technique that is studied in order to mitigate or suppress large edge localized modes which accompany…

The first high-power (> 3 MW) H-mode experiments using a double-null X-point-target (XPT) divertor configuration have been performed on MAST-U. The XPT geometry is obtained by combining a large strike point radius, similar to the Super-X…

The Super-X Divertor (SXD) is an alternative divertor configuration leveraging total flux expansion at the Outer Strike Point (OSP). While the extended 2-Point Model (2PM) predicts facilitated detachment access and control in the SXD…

Designing superconducting coils for a tokamak fusion device is a highly coupled, non-linear design problem. The coils have many disparate engineering requirements from structural to power electronics, as well strict limits placed on the…

This study investigates a simplified stellarator configuration employing circular coils, in which rotational transform is generated by tilting the toroidal field (TF) coils. A pair of axisymmetric poloidal field (PF) coils is introduced to…

A new Gas Puff Imaging (GPI) diagnostic has been installed on the TCV tokamak, providing two-dimensional insights into Scrape-Off-Layer (SOL) turbulence dynamics above, at and below the magnetic X-point. A detailed study in L-mode,…

One of the main challenges concerning next generation tokamaks (such as DEMO) will be the development of a heat and power exhaust system able to withstand the large loads expected in the divertor region. A dedicated Divertor Tokamak Test…

Nitrogen seeded detachment has been achieved in the Tokamak a Configuration Variable (TCV) in advanced divertor configurations (ADCs), namely X-divertor and X-point target, with and without baffles in H-mode plasmas with high core…

The SOL width is a parameter of paramount importance in modern tokamaks as it controls the power density deposited at the divertor plates, critical for plasma-facing material survivability. An understanding of the parameters controlling it…

A new optimized quasihelically symmetric configuration is described that has the desir-able properties of improved energetic particle confinement, reduced turbulent transportby 3D shaping, and non-resonant divertor capabilities. The…

We analyze a Hamiltonian model with five wire loops that delineates the magnetic surfaces of the tokamak ITER, including a similar safety factor profile and the X-point related to the presence of a poloidal divertor. Non-axisymmetric…

High flux expansion divertor studies have been carried out in the National Spherical Torus Experiment using steady-state X-point height variations from 22 to 5-6 cm. Small-ELM H-mode confinement was maintained at all X-point heights.…