相关论文: Electrochemical polymerization of anilinium hydroc…
Conductive polymers or "organic metals" are highly engineered nanostructured materials made from organic building blocks. They are candidates as molecular wires for nanotechnology applications in molecular electronics. The conduction in…
Titration of methacrylic acid / ethyl-acrylate copolymers is studied experimentally and theoretically. At low salt concentrations, this polyacid exhibits a plateau in the titration curve below the neutralization point. The plateau has been…
This chapter deals with charged polymers (polyelectrolytes) in solution and at surfaces. The behavior of polyelectrolytes is markedly different from that of neutral polymers. In bulk solutions, i.e. disregarding the surface effect, there…
We report the fabrication of electrically functional polyaniline thin-film microdevices. Polyaniline films were printed in the solid phase by Laser Induced Forward Transfer directly between Au electrodes on a Si/SiO2 substrate. To apply…
Theory is presented to simulate both chronoamperometry and cyclic voltammetry at porous electrodes fabricated by means of electro-deposition around spherical templates. A theoretical method to extract heterogeneous rate constants for…
A better understanding of interfacial mechanisms is needed to improve the performances of electrochemical devices. Yet, simulating an electrode surface at fixed electrolyte composition remains a challenge. Here we apply a finite electric…
Electropolishing has found wide application as the final surface treatment of metal products in mechanical engineering and instrumentation, medicine and reflective concentrators for PV cells. It was found that electropolishing (EP) not only…
A novel technique to deposit metals on highly conjugated polyaniline films has been developed. In general, electrodeposition of metals, having low reduction potential, from aqueous solution, is difficult due to disruptive effect of hydrogen…
Surface-bound electric charge on polymer materials can strongly influence droplet behaviour and solid-liquid charge transfer, but the mechanisms and the means to control these effects remain unclear. In this work, we systematically…
Nonlinear field dependence of electrophoresis in high fields has been investigated theoretically, yet experimental studies have failed to reach consensus on the effect. In this work, we present a systematic study on the nonlinear…
We report on the development of some process capabilities for a polymer-based, multi-layer microelectrofluidic platform, namely: the hot embossing process, metallization on polymer and polymer bonding. Hot embossing experiments were…
We have fabricated pairs of platinum electrodes with separation between 20 and 3.5 nm. Our technique combines electron beam lithography and chemical electrodeposition. We show that the measurement of the conductance between the two…
Surface electronic properties of undoped hydrogen terminated diamond covered with adsorbates or in electrolyte solutions are summarized. The formation of a conductive layer at the surface of diamond is discussed based on Hall effect,…
The behavior of a polyelectrolyte adsorbed on a charged substrate of high-dielectric constant is studied by both Monte-Carlo simulation and analytical methods. It is found that in a low enough ionic strength medium, the adsorption…
The behavior of a polyelectrolyte adsorbed on a charged surface of high-dielectric constant is studied by both Monte-Carlo simulation and analytical methods. It is found that in a low ionic strength medium, the transition is first-order…
Polymer electrolytes are intensely investigated for use as solid electrolytes in next generation lithium-ion and lithium-metal batteries. However, little is known about the structural and dynamical properties of polymer electrolytes close…
Electrodeposition of tantalum coating was performed from an ionic liquid, BMP[Tf2N], in the presence of dissolved anhydrous TaF5 and LiF. Superficial X-ray photoelectron spectroscopy supplemented by an argon ion etching and depth profiling…
Rechargeable lithium, sodium, and aluminum metal-based batteries are among the most versatile platform for high-energy, cost effective electrochemical energy storage. Non-uniform metal deposition and dendrite formation on the negative…
The problem of charged polymer chains (polyelectrolytes) as they adsorb on a planar surface is addressed theoretically. We review the basic mechanisms and theory underlying polyelectrolyte adsorption on a single surface in two situations:…
A series of well-defined hydrophilic and hydrophobic polyelectrolytes of various chain lengths $N$ and effective charge fractions $f_{eff}$ have been adsorbed onto oppositely charged solid surfaces immersed in aqueous solutions. \emph{In…