相关论文: Single-exposure profilometry using partitioned ape…
We describe a method that uses total internal reflection at the water-air interface inside a large, transparent tank, to measure the interface's deflections. Using this configuration, we obtain an optical set-up where the liquid surface…
We introduce a full field fluorescence imaging technique with axial confinement of about 100 nm at the sample/substrate interface. Contrary to standard surface imaging techniques, this confinement is obtained through emission filtering.…
We introduce an interferometric technique for passive time-of-flight imaging and depth sensing at micrometer axial resolutions. Our technique uses a full-field Michelson interferometer, modified to use sunlight as the only light source. The…
It has been seen recently that when probing a nanoscale object to determine, for example, size or position via light scattering, significant advantage in measurement precision can be gained from exploiting phase singularities in a…
Nanoscale surface analysis of 1 micrometer thick high entropy alloys (HEAs) was carried out using nano-IR for hyperspectral imaging and single point spectroscopy in the 700-1700 1/cm spectral range. Nano-IR is based on the detection of…
We present a simplified yet sophisticated variation to localised surface plasmon resonance spectroscopy, which makes use of naked or non-functionalised, nanoparticle templates. These nanoparticle templates, produced with a rapid and…
Transmission spectra of metallic films or membranes perforated by arrays of subwavelength slits or holes have been widely interpreted as resonance absorption by surface plasmon polaritons (SPPs). Alternative interpretations involving…
Phase contrast imaging seeks to reconstruct the complex refractive index of an unknown sample from scattering intensities, measured for example under illumination with coherent X-rays. By incorporating refraction, this method yields…
We describe a high resolution imaging detector based on a single 80 mm micro-channel-plate (MCP) and a phosphor screen mounted on a UHV flange of only 100 mm inner diameter. It relies on standard components and we describe its performance…
Three-dimensional (3D) imaging of thin, extended specimens at nanometer resolution is critical for applications in biology, materials science, advanced synthesis, and manufacturing. One route to 3D imaging is tomography, which requires a…
Fluorescence imaging is an essential diagnostic tool in many fields, but diffraction-limited optical imaging at depth is limited by scattering. Here, we present a method based on multiple random illuminations, combined with a computational…
The structure and dynamics of isolated nanosamples in free flight can be directly visualized via single-shot coherent diffractive imaging using the intense and short pulses of X-ray free-electron lasers. Wide-angle scattering images even…
High-contrast imaging provided by a coronagraph is critical for the direction imaging of the Earth-like planet orbiting its bright parent star. A major limitation for such direct imaging is the speckle noise that is induced from the…
The characterization of exoplanet atmospheres using direct imaging spectroscopy requires high-contrast over a wide wavelength range. We study a recently proposed focal plane wavefront estimation algorithm that exclusively uses broadband…
Spectrometry is a general physical-analysis approach for investigating light-matter interactions. However, the complex designs of existing spectrometers render them resistant to simplification and miniaturization, both of which are vital…
Wavefront aberrations can reflect the imaging quality of high-performance optical systems better than geometric aberrations. Although laser interferometers have emerged as the main tool for measurement of transmitted wavefronts, their…
Structured light 3D surface imaging is a school of techniques in which structured light patterns are used for measuring the depth map of the object. Among all the designed structured light patterns, phase pattern has become most popular…
We use focused-ion-beam milling of a single-crystal Au surface to fabricate a 590-nm-long linear ridge that acts as a surface plasmon nanoresonator. Cathodoluminescence imaging spectroscopy is then used to excite and image surface plasmons…
Wavefront sensors are an important tool to characterize coherent beams of extreme ultraviolet radiation. However, conventional Hartmann-type sensors do not allow for independent wavefront characterization of different spectral components…
Accurate characterisation of margins in excised breast cancer tumours is critical to the success of surgical interventions, yet margin status is typically confirmed post-operatively using histopathology. Here we present a new approach to…