相关论文: Simple feed-through for coupling optical fibres in…
Photonic technologies offer numerous advantages for astronomical instruments such as spectrographs and interferometers owing to their small footprints and diverse range of functionalities. Operating at the diffraction-limit, it is…
Sapphire fiber can withstand around 2000{\deg}C, but it is multimoded, giving poor precision sensors. We demonstrate a single-mode sapphire fiber Bragg grating temperature sensor operating up to 1200{\deg}C. The repeatability above…
We report a weighing metrology experiment of a single silica microsphere optically trapped and immersed in air. Based on fluctuations about thermal equilibrium, three different mass measurements are investigated, each arising from one of…
We have extended the range of the high-pressure optical spectroscopy to the far-infrared region keeping the accuracy of ambient-pressure experiments. The newly-developed method offers a powerful tool for the study of pressure-induced phase…
The filled-skutterudite compound CeRu$_4$Sb$_{12}$ shows a pseudo-gap structure in the optical conductivity spectra similar to the Kondo insulators, but metallic behavior below 80 K. The resistivity shows a large peak at 80 K, and the…
We consider mid-infrared (5 to 25 micrometers), optically cooled detectors based on a microcantilever sensor of the radiation pressure. A significant enhancement of sensitivity is achieved due the combination of low effective temperature…
We present measurements of the low temperature thermal conductivity for materials useful in the construction of cryogenic supports for scientific instrumentation and in the fabrication of flat flexible cryogenic cabling. The materials we…
A setup is designed for measuring the Seebeck coefficient (S) of materials in form of thin film, bar and wire. The main feature of this setup is control in heating and cooling cycles. In this setup heat pulse is used to generate the…
A complete integrated table-top facility for the study of high-$Q$ Whispering Gallery Modes in solid and liquid micro-cavities is described, with emphasis on the in situ fabrication of reliable tapered fibers of sub-micron waist sizes for…
A light injection system using LEDs and optical fibres was designed for the calibration and monitoring of the photomultiplier array of the SNO+ experiment at SNOLAB. Large volume, non-segmented, low-background detectors for rare event…
We describe a set-up for studying adsorption of helium in silica aerogels, where the adsorbed amount is easily and precisely controlled by varying the temperature of a gas reservoir between 80 K and 180 K. We present validation experiments…
In this paper, we report on the integration of a Correlation-OTDR into a portable unit (30 cm x 30 cm), based on a multi-processor system on chip (MPSoC) and a small formfactor pluggable (SFP) 2.5G transceiver. Going beyond…
Sapphire optical fiber shows great promise for remote sensing in extreme environments approaching 2000 degC, by using laser-processing to form a single-mode waveguide within it. However, for practical application, longer devices with high…
Since the first demonstration of optical refrigeration in a rare-earth-doped glass nearly 30 years ago, the nascent field of laser cooling solids has progressed significantly. It is now possible to demonstrate payload cooling to ~91 K using…
Characteristics of a diffusion-bonded sapphire cell for optical experiments with hot metal vapors were investigated. The sapphire cell consisted of sapphire-crystal plates and a borosilicate-glass tube, which were bonded to each other by…
We developed an apparatus to couple a 50-micrometer diameter whispering-gallery silica microtoroidal resonator in a helium-4 cryostat using a straight optical tapered-fiber at 1550nm wavelength. On a top-loading probe specifically adapted…
Characterising materials at pressures of several megabar and temperatures of a few thousand Kelvin is critical for the understanding of the Warm Dense Matter regime and to improve planetary models as these conditions are typical of planets'…
We demonstrate a high-accuracy distributed fiber-optic temperature sensor using superconducting nanowire single-photon detectors and single-photon counting techniques. Our demonstration uses inexpensive single-mode fiber at standard…
The integration of photonic sensors into microfluidic devices provides opportunities for dynamic measurement of chemical and physical properties of fluids in very small volumes. We previously reported on the use of commercially available…
The Fiber Optical Cable and Connector System (FOCCoS), provides optical connection between 2400 positioners and a set of spectrographs through optical fibers cables as part of PFS instrument for Subaru telescope. The optical fiber cable…