相关论文: Monitoring the formation of oxide apertures in mic…
Repetitive wet thermal oxidations of a tapered oxide aperture in a micropillar structure are demonstrated. After each oxidation step the confined optical modes are analyzed at room temperature. Three regimes are identified. First, the…
We have performed white-light reflectivity measurements on GaAs/AlAs micropillar cavities with diameters ranging from 1 {\mu}m up to 20 {\mu}m. We are able to resolve the spatial field distribution of each cavity mode in real space by…
We report on the fabrication and characterization of a micromechanical oscillator consisting only of a free-standing dielectric Bragg mirror with high optical reflectivity and high mechanical quality. The fabrication technique is a hybrid…
On-chip optical trapping systems allow for high scalability and lower the barrier to access. Systems capable of trapping multiple particles typically come with high cost and complexity. Here we present a technique for making parabolic…
We present an approach to the molecular-beam epitaxy of high-Q planar GaAs-based microcavities in which the AlGaAs high-index layers of the distributed Bragg reflectors (DBRs) are replaced by short-period GaAs/AlAs superlattices (digital…
We report on the design, realization and characterization of optically pumped micropillar lasers with low-absorbing Al$_{0.2}$Ga$_{0.8}$As/Al$_{0.9}$Ga$_{0.1}$As dielectric Bragg reflectors (DBRs) instead of commonly used GaAs/AlGaAs DBRs.…
We report a scalable and cost-effective method for fabricating high-performance Bragg mirrors using a bottom-up approach that combines evaporation-induced self-assembly (EISA) and dip-coating. The photonic crystals are composed of…
High-quality micropillar cavities were grown using molecular-beam epitaxy. Stable continuous-wave lasing at room-temperature was demonstrated for microlasers with semiconductor and hybrid output mirrors. At 300 K, single-mode lasing was…
It is shown that cavities formed between a multilayer quarter-wave Bragg reflector and a metal mirror which support Tamm plasmons can be modelled by using a hard-mirror approximation including appropriate penetration depths into the…
We present a detailed experimental characterization of the spectral and spatial structure of the confined optical modes for oxide-apertured micropillar cavities, showing good-quality Hermite-Gaussian profiles, easily mode-matched to…
A detailed analysis of the use of an optical cavity to enhance picosecond ultrasonic signals is presented. The optical cavity is formed between a distributed Bragg reflector (DBR) and the metal thin film samples to be studied. Experimental…
Optical cavities play a central role in photonic and quantum technologies by enhancing light-matter interactions. In semiconductor microcavities, achieving high quality (Q) factors typically relies on sophisticated epitaxial growth…
If metal surfaces are exposed to sufficiently oxygen-rich environments, oxides start to form. Important steps in this process are the dissociative adsorption of oxygen at the surface, the incorporation of O atoms into the surface, the…
Increasing the interaction between light and mechanical resonators is an ongoing endeavor in the field of cavity optomechanics. Optical microcavities allow for boosting the interaction strength through their strong spatial confinement of…
It is prohibitively expensive to deposit customized dielectric coatings on individual optics. One solution is to batch-coat many optics with extra dielectric layers, then remove layers from individual optics as needed. Here we present a…
We report the development of a detection optics for the integration of Raman scattering and scanning probe microscopy at low temperature based on a parabolic mirror. In our set-up half of the paraboloid mirror covers a solid angle of $\pi$…
We have fabricated pillar microcavity samples with Bragg mirrors consisting of alternate layers of GaAs and Aluminium Oxide. Compared to the more widely studied GaAs/AlAs micropillars these mirrors can achieve higher reflectivities with…
Complex optical systems such as high-quality microcavities enabled by advanced lithography and processing techniques paved the way to various light-matter interactions (LMI) studies. Without lattice-matching constraints in epitaxy, coating…
We are developing instrumentation for a telescope design capable of measuring linear X-ray polarization over a broad-band using conventional spectroscopic optics. Multilayer-coated mirrors are key to this approach, being used as Bragg…
We describe a new technology for the fabrication of inexpensive high-quality mirrors. We begin by chemically producing a large number of metallic nanoparticles coated with organic ligands. The particles are then spread on a liquid substrate…