相关论文: The FNAL injector upgrade

The LEDA RFQ, a 350-MHz continuous wave (CW) radio-frequency quadrupole (RFQ), successfully accelerated a 100-mA CW proton beam from 75 keV to 6.7 MeV. We have accumulated 111 hr of beam on time with at least 90 mA of CW output beam…

A superconducting RF accelerator test facility is currently under construction at Fermilab. The accelerator will consist of an electron gun, 40 MeV injector, beam acceleration section consisting of 3 TTF-type or ILC-type cryomodules, and…

This paper reports on the feasibility study of a proton Super-Conducting Linac (SCL) as a new injector to the Alternating Gradient Synchrotron (AGS) of the Brookhaven National Laboratory (BNL). The Linac beam energy is in the range of 1.5…

The Fermilab High Intensity Neutrino Source program has built and commissioned a pulsed 325 MHz RFQ. The RFQ has successfully accelerated a proton beam at the RFQ design RF power. Experiences encountered during RFQ conditioning, including…

This paper presents measurements of the beam transmission performed on the 4-rod RFQ currently under operation at Fermilab. The beam current has been measured at the RFQ exit as a function of the magnetic field strength in the two LEBT…

A concept of a high-power magnetron transmitter for operation within a wideband control feedback loop in phase and amplitude is presented. This transmitter is proposed to drive Superconducting RF (SRF) cavities for intensity-frontier…

We summarize the current state of a concept for muon acceleration aimed at a future Neutrino Factory. The main thrust of these studies was to reduce the overall cost while maintaining performance by exploring the interplay between the…

KEK electron linac was upgraded to 8 GeV for the KEK B-Factory (KEKB) project. During the commissioning of the upgraded linac, even continuing SOR ring injections, we had achieved a primary electron beam with 10-nC (6.24 x 10^10) per bunch…

Magnetrons are widely used as a high-efficiency, large-power, and low-cost microwave source. This article proposes a method to improve the magnetron output characteristics based on regulating its anode current by a novel active distortion…

IsoDAR is a novel experiment designed to measure neutrino oscillations through $\bar{\nu}_e$ disappearance, thus providing a definitive search for sterile neutrinos. In order to generate the necessary anti-neutrino flux, a high intensity…

At the end of the Large Hadron Collider's Run 2, CERN's Proton Injector Linac 2, commissioned in 1978, delivered its final beam in December 2018. For Run 3, from March 2021, a new H$^{-}$ will take over the role: Linac4. The machine has…

High luminosity in DAFNE needs very high electron and positron currents stored. A full energy (510 MeV) injection system composed by a full energy electron and positron linac and an accumulator-damping ring is presently used. The electron…

From 2004 the Frascati Beam Test Facility (BTF) in the DAFNE accelerator complex provides to the external user up to 1E10 electrons per bunch or up to 10E9 positrons per bunch to develop their detectors. After an upgrade program terminated…

Continuous developments in Additive Manufacturing (AM) technologies are opening opportunities in novel machining, and improving design alternatives for modern particle accelerator components. One of the most critical, complex, and delicate…

We consider acceleration light ions by the field of a traveling-wave in a helical waveguide. The frequency of the accelerating RF field f = 100 MHz, generator power P = 2 MW. Ion focusing is provided by a solenoidal magnetic field with the…

In 2023, we are replacing the LLRF system for the KEK-PF 2.5 GeV ring. The new system is composed of digital boards such as eRTM, AMC, and {\mu}RTM, based on the MTCA.4 standard. In our system, we adopted the non-IQ direct sampling method…

The Fusion Prototypic Neutron Source (FPNS) is considered to be a testbed for scientific understanding of material degradation in future nuclear fusion reactors [1-3]. The primary mission of FPNS is to provide a damage rate in iron samples…

The Oak Ridge National Laboratory STS Project will enhance the Spallation Neutron Source by adding a new neutron source. The upgrade includes a 30% increase in beam energy and a 50% boost in beam current, doubling the accelerator's power…

The intense neutron source for development of fusion materials planned by international collaboration makes a new step to clarify the technical issues for realizing the 40 MeV, 250 mA deuteron beam facility. The baseline concept employs two…

In this article, we investigate the performance of an injection-locked 5.8-GHz continuous-wave magnetron with various load reflection levels. The load reflection is introduced to an equivalent magnetron model to theoretically evaluate the…