相关论文: Precipitate assemblies formed on dislocation loops…
The excellent mechanical properties of the Ni-based superalloy IN718 mainly result from coherent $\gamma''$ precipitates. Due to a strongly anisotropic lattice misfit between the matrix and the precipitate phase, the particles exhibit…
We consider the process of precipitation in binary alloys in the presence of mechanical deformation. It is commonly observed that mechanical deformation prior to or during precipitation leads to microstructure with excess defects, which…
Semicoherent precipitates govern strength, stability and transformation pathways in structural alloys, yet the kinetic defect process underlying their three-dimensional growth has remained unresolved. Here we show that lath growth is driven…
Additively manufactured (AM) aluminum alloys with high strength and thermal stability have broad applications in turbine engines, vacuum pumps, heat exchangers, and many other industrial systems. Employing precipitates with an L1$_2$…
The interaction between dislocations and precipitates plays an important role in the mechanical behavior of alloys. To provide more insight into the physics of this interaction, this research analyzes short-range interactions of an edge…
The interaction between edge basal dislocations and $\beta$-Mg$_{17}$Al$_{12}$ precipitates was studied using atomistic simulations. A strategy was developed to insert a lozenge-shaped Mg$_{17}$Al$_{12}$ precipitate with Burgers orientation…
Atomistic simulations are used to study linear complexion formation at dislocations in a body-centered cubic Fe-Ni alloy. Driven by Ni segregation, precipitation of the metastable B2-FeNi and stable L10-FeNi phases occurs along the…
In this work electron backscattered diffraction (EBSD)-assisted slip trace analysis and transmission electron microscopy have been utilized to investigate the interaction of basal dislocations with precipitates in the Mg alloys…
The composition, crystal structure and precipitation crystallography of a newly found precipitate are characterized by a Cs-corrected scanning transmission electron microscopy (STEM). The composition of the plate-like precipitate could be…
Precipitation strengthening is one of the most effective methods to design alloys with the desired combination of strength and ductility. The main mechanism of strengthening is generally known to be the interaction between dislocations and…
We investigate, via three-dimensional atomistic computer simulations, phase separation in an alloy under external load. A regular two-dimensional array of cylindrical precipitates, forming a mesoscopic precipitate lattice, evolves in the…
Precipitate-matrix interactions govern the mechanical behavior of precipitate strengthened Al-based alloys. These alloys find a wide range of applications ranging from aerospace to automobile and naval industries due to their low cost and…
The mechanical properties of Mg-4wt.% Zn alloy single crystals along the [0001] orientation were measured through micropillar compression at 23C and 100C. Basal slip was dominant in the solution treated alloy, while pyramidal slip occurred…
The high strength of structural aluminium alloys depends strongly on the controlled precipitation of specific intermetallic phases, whose identity and crystal structure can be difficult to predict. Here, we investigate the Al-Pt system,…
The two-dimensional dislocation dynamics approach has been recently used for analyzing plastic deformation in metals and alloys at elevated temperatures. The two-dimensional approach, however, only accounts for the dislocation climbing…
The mechanisms of dislocation/precipitate interaction were studied by means of discrete dislocation dynamics within a multiscale approach. Simulations were carried out using the discrete continuous method in combination with a fast Fourier…
Alloying metals with other elements is often done to improve the material strength or hardness. A key microscopic mechanism is precipitation hardening, where precipitates impede dislocation motion, but the role of such obstacles in…
While lean Mg-Zn-Ca alloys are promising materials for temporary implants, questions remain on the impact of Zn and Ca. In this context, the precipitation in Mg-1.5Zn-0.25Ca (ZX20, in wt.%) was investigated upon linear heating from about…
Patterning of precipitates along dislocation lines arising from nonequilibrium segregation during ion irradiation is investigated in model binary alloys. Lattice kinetic Monte Carlo simulations reveal that the competition between solute…
Defects play a key role in deciding the mechanisms and kinetics of phase transformations. In this paper, we show how dislocations influence phase separation in alloys with miscibility gap. Specifically, depending on the ratio of pipe…