相关论文: Measuring Oxygen, Carbon Monoxide and Hydrogen Sul…
It is important to measure in-plane conductivity of Nafion membrane for fuel cell, but this target is generally inhibited by measuring system with heterogeneous interfaces and immature electrochemical measurements. This paper simply used…
Nafion is a perfluorosulfonated polymer, widely used in Proton Exchange Membrane Fuel Cells. This polymer adopts a complex structural organisation resulting from the microsegregation between hydrophobic backbones and hydrophilic sulfonic…
The physio-chemical properties of Nafion 115 and a composite Nafion 115/Zirconium Phosphate (25wt%) membranes are compared. The composite membrane takes up more water than Nafion at the same water activity. However, the proton conductivity…
Reported here are theoretical calculations on the triflic acid and water, establishing molecular scale information necessary to modeling of the structure, thermodynamics, and ionic transport of Nafion membranes. To characterize side chain…
In this paper we report the determination of oxygen diffusion coefficient for optimally doped manganite thin films of La0.85Na0.15MnO3 (LNMO). The study was performed by means of isothermal conductivity measurements on two different…
We investigate the dynamics of water confined in soft ionic nano-assemblies, an issue critical for a general understanding of the multi-scale structure-function interplay in advanced materials. We focus in particular on hydrated…
We present a macrohomogeneous two-phase model of a proton exchange membrane fuel cell (PEMFC). The model takes into account the mechanical compression of the gas diffusion layer (GDL), the two-phase flow of water, the transport of the gas…
Measurements on helium and argon gas flow through an array of parallel, linear channels of 12 nm diameter and 200 micrometer length in a single crystalline silicon membrane reveal a Knudsen diffusion type transport from 10^2 to 10^7 in…
As programs to support efficient and sustainable energy sources are expanding, research into the potential applications of the hydrogen vector is accelerating. Proton exchange membrane fuel cells are electrochemical converters that…
The efficiency of a proton exchange membrane (PEM) fuel cell depends on the mobility of protons in the PEM, which is determined by the hydration and temperature of the membrane. While optical techniques or neutron or x-ray scattering…
We study Na ion diffusion and electrochemical performance of NaVO$_3$ (NVO) as anode material in Li/Na--ion batteries with the specific capacity of $\approx$350 mAhg$^{-1}$ at the current density 11~mAg$^{-1}$ after 300 cycles. Remarkably,…
Electrochemically exfoliated graphene (e-G) thin films on Nafion$^{(R)}$ membranes exhibit a selective barrier effect against undesirable fuel crossover. The approach combines the high proton conductivity of state-of-the-art Nafion$^{(R)}$…
High stability and oxygen permeability are two prominent requirements for the oxygen transport membrane candidates used as industrialization. Herein, we report several composite membranes based on…
We report the electrochemical investigation and study the diffusion kinetics of boron doped Na$_{0.66}$Mn$_{0.8}$Fe$_{0.2}$O$_{2}$ (B-NMFO) cathode materials for sodium-ion batteries. Notably, the B-NMFO cathode exhibits improved specific…
We present and discuss the results of ab initio DFT plane-wave supercell calculations of the atomic and molecular oxygen adsorption and diffusion on the LaMnO3 (001) surface which serves as a model material for a cathode of solid oxide fuel…
Solid-state nanofoaming experiments are conducted on two PMMA grades of markedly different molecular weight using CO$_2$ as the blowing agent. The sensitivity of porosity to foaming time and foaming temperature is measured. Also, the…
We report the electrochemical performance and diffusion kinetics of a newly designed NASICON type Na$_{3.3}$Mn$_{1.2}$Ti$_{0.75}$Mo$_{0.05}$(PO$_4$)$_3$/C composite material as a cathode for cost-effective sodium-ion batteries. A novel…
Ever since modeling has become a mature part of proton exchange membrane fuel cell (PEMFC) research and development, it has been plagued by significant uncertainty lying in the detailed knowledge of material properties required.…
Five parameters of a model of a polymer electrolyte membrane fuel cell cathode (the porosity of the gas diffusion layer, the porosity of the catalyst layer, the exchange current density of the oxygen reduction reaction, the effective ionic…
Multicomponent gas transport is investigated with unprecedented precision by AC impedance analysis of porous YSZ anode-supported solid oxide fuel cells. A fuel gas mixture of H2-H2O-N2 is fed to the anode, and impedance data are measured…