相关论文: Stress controlled magnetic properties of Cobalt na…
We study magnetic, transport and thermal properties of Cobalt carbide nanocomposite with a mixture of Co2C and Co3C phases in 1:1 ratio, with an average particle diameter of 40$\pm 15$ nm. We show that the behavior of the nanocomposite is…
Recent work [1] demonstrated high coercivity and magnetic moment in cobalt carbide nanoparticle assemblies and explained the high coercivity from first principles in terms of the high magnetocrystalline anisotropy of the cobalt carbide…
We report on the magnetic properties and the crystallographic structure of the cobalt nanowire arrays as a function of their nanoscale dimensions. X-ray diffraction measurements show the appearance of an in-plane HCP-Co phase for nanowires…
The magnetic properties of carbon nanotube encapsulated nickel nanowires (C.E. nanowires of diameter ~ 10 nm), and its comparison to other forms of Ni are carried out in this work. The saturation magnetization (M_s) and coercivity (H_c) for…
We prepared very high-coercivity cobalt ferrite nanoparticles using short-time high-energy mechanical milling. After the milling process, the coercivity of the nanoparticles reached 3.75 kOe - a value almost five times higher than that…
We present the fabrication of metallic magnetic nanowires using a low temperature chemical process. We show that pressed powders and magnetically oriented samples exhibit a very high coercivity (6.5 kOe at 140 K and 4.8 kOe at 300 K). We…
Cobalt nanowires with a diameter in the range between 50 to 100nm can be prepared as single-crystal wires with the easy axis (the c-axis) perpendicular to the wire axis. The competition between the crystal anisotropy and demagnetization…
Magnetic nanowires are critical components in fields such as data storage and spintronics, where precise control of their magnetic properties is essential for device optimization. In particular, the behavior of isolated nanowires is often…
We report on the synthesis of ferromagnetic cobalt nanocubes of various sizes using thermal pyrolysis method and the effect of shape anisotropy on the static and dynamic magnetic properties were studied. Shape anisotropy of approximately 10…
We aim at combining high coercivity magnetic nanowires in a polymer matrix in a view to fabricate rare--earth free bonded magnets. In particular, our aim is to fabricate anisotropic materials by aligning the wires in the polymer matrix. We…
Compositionally complex materials (CCMs) present a potential paradigm shift in the design of magnetic materials. These alloys exhibit long-range structural order coupled with limited or no chemical order. As a result, extreme local…
Composite multiferroics are materials exhibiting the interplay of ferroelectricity, magnetism, and strong electron correlations. Typical example --- magnetic nano grains embedded in a ferroelectric matrix. Coupling of ferroelectric and…
The magnetic properties of Co (<D>=15 nm, <L>=130nm) nanowires are reported. In oxidized wires, we measure large exchange bias fields of the order of 0.1 T below T ~ 100 K. The onset of the exchange bias, between the ferromagnetic core and…
The possibility of using exchange bias in ferromagnetic-antiferromagnetic system to over come the effect of superparamagnetism in small cobalt nanoparticles is explored. We have prepared Co-Cr2O3 nanocomposite powders using a chemical…
We synthesized pure and Co-doped (6.25 12.5 at.) ZrO$_2$ nanopowders in order to study their magnetic properties.We analyzed magnetic behavior as a function of the amount of Co and the oxygenation, which was controlled by low pressure…
In this work, we present a detailed investigation of the magnetic properties of cobalt nanospheres grown on cantilever tips by Focused Electron Beam Induced Deposition (FEBID). The cantilevers are extremely soft and the cobalt nanospheres…
Gamma - Iron Oxide prepared by sol -gel process was used to produce nanocomposites with polyaniline of varying aniline concentrations. TEM shows the presence of chain like structure for lower polyaniline concentration. The room temperature…
This research paper investigates new and first insights into the magnetic and magnetocaloric properties of one-dimensional (1D) cobalt ferrite CoFe2O4 (CFO) nanofibers elaborated by sol gel based electrospinning technique, particularly…
The exchange interaction between nanostructured components is an effective way to enhance the magnetic properties of materials. This effect is used in exchange-coupled magnetic composites, which properties are governed by synergetic impact…
We investigate the role of dipolar interactions on the magnetic properties of nanowires aggregates. Micromagnetic simulations show that dipolar interactions between wires are not detrimental to the high coercivity properties of magnetic…