相关论文: Performance of MF-MSK Systems with Pre-distortion …

Real-world wireless transmitter front-ends exhibit certain nonlinear behavior, e.g., signal clipping by a Power Amplifier (PA). Although many resource allocation solutions do not consider this for simplicity, it leads to inaccurate results…

Massive MIMO systems are typically designed assuming linear power amplifiers (PAs). However, PAs are most energy efficient close to saturation, where non-linear distortion arises. For conventional precoders, this distortion can coherently…

In this work, we analyze how the use of companding techniques, together with digital predistortion (DPD), can be leveraged to improve system efficiency and performance in simultaneous wireless information and power transfer (SWIPT) systems…

Large array systems use a massive number of antenna elements and clever precoder designs to achieve an array gain at the user location. These precoders require linear front-ends, and more specifically linear power amplifiers (PAs), to avoid…

This study reports a novel hardware-friendly modular architecture for implementing one dimensional convolutional neural network (1D-CNN) digital predistortion (DPD) technique to linearize RF power amplifier (PA) real-time.The modular nature…

Dealing with nonlinear effects of the radio-frequency(RF) chain is a key issue in the realization of very large-scale multi-antenna (MIMO) systems. Achieving the remarkable gains possible with massive MIMO requires that the signal…

Josephson parametric amplifiers have become a critical tool in superconducting device physics due to their high gain and quantum-limited noise. Traveling wave parametric amplifiers (TWPAs) promise similar noise performance while allowing…

The relentless scaling of classical microelectronics has been enabled by the precision and reproducibility of deep-ultraviolet (DUV) optical lithography. Implementing large-scale superconducting quantum processors will require cryogenic…

Wireless Power Transfer (WPT) is expected to be a technology reshaping the landscape of low-power applications such as the Internet of Things, Radio Frequency identification (RFID) networks, etc. Although there has been some progress…

Radio frequency (RF) wireless power transfer (WPT) is a promising technology for future wireless systems. However, the low power transfer efficiency (PTE) is a critical challenge for practical implementations. One of the main inefficiency…

Waveform optimization has recently been shown to be a key technique to boost the efficiency and range of far-field wireless power transfer (WPT). Current research has optimized transmit waveform adaptive to channel state information (CSI)…

Orthogonal time frequency space (OTFS) modulation is a recently proposed delay-Doppler (DD) domain communication scheme, which has shown promising performance in general wireless communications, especially over high-mobility channels. In…

In modern 5G user equipments (UEs), the power amplifier (PA) contributes significantly to power consumption during uplink transmissions, especially in cell-edge scenarios. While reducing power backoff can enhance PA efficiency, it…

Traveling-wave parametric amplifiers (TWPAs) have attracted much attention for their broadband amplification and near-quantum-limited noise performance. TWPAs are non-reciprocal by nature providing gain for forward-propagating signals and…

Digital predistortion is the process of correcting for nonlinearities in the analog RF front-end of a wireless transmitter. These nonlinearities contribute to adjacent channel leakage, degrade the error vector magnitude of transmitted…

Adaptive Power Allocation (PA) algorithms with different criteria for a cooperative Multiple-Input Multiple-Output (MIMO) network equipped with Distributed Space-Time Coding (DSTC) are proposed and evaluated. Joint constrained optimization…

Nonlinear distortion of an OFDM signal is a serious problem when it comes to energy-efficient Power Amplifier(PA) utilization. Typically, Peak-to-Average Power Ratio(PAPR) reduction algorithms and digital predistortion algorithms are used…

To keep massive MIMO systems cost-efficient, power amplifiers with rather small output dynamic ranges are employed. They may distort the transmit signal and degrade the performance. This paper proposes a distortion aware precoding scheme…

Multiple-input multiple-output (MIMO) millimeter wave (mmWave) systems are vulnerable to hardware impairments due to operating at high frequencies and employing a large number of radio- frequency (RF) hardware components. In particular,…

In this paper, we provide a novel framework for efficient digital predistortion (DPD) based linearization of active antenna arrays with multiple and mutually different nonlinear power amplifiers. The proposed method builds on the use of a…