相关论文: Drying and deposition of poly(ethylene oxide) drop…
The shape of deposits obtained from drying drops containing colloidal particles matters for technologies such as inkjet printing, microelectronics and bioassay manufacturing. In this work, the formation of deposits during the drying of…
Structural transitions and the melting behavior of crystalline poly(ethylene oxide),(CH2-CH2-O)n, (PEO) has been investigated using fully atomistic, constant pressure-constant temperature (NPT) molecular dynamics (MD) simulations. Melting…
Drying colloidal droplets have a wide range of applications from medical diagnostics to coatings for industries. This paper explores the effects of the substrate temperature (ranging from $25$ to $55 ^{\circ}$C) and various initial…
When a binary fluid demixes under a slow temperature ramp, nucleation, coarsening and sedimentation of droplets lead to an oscillatory evolution of the phase separating system. The advection of the sedimenting droplets is found to be…
The presence of a very small amount of high molecular weight polymer significantly delays the pinch-off singularity of a drop of water falling from a faucet, and leads to the formation of a long-lived cylindrical filament. In this paper we…
The evaporation of a binary sessile ethanol-water droplet on an inclined substrate is studied experimentally just below the critical sliding angles for different substrate temperatures. A customized goniometer equipped with a CMOS camera…
We experimentally investigate the deformation and breakup of droplets interacting with an oblique continuous air stream. A high-speed imaging system is employed to record the trajectories and topological changes of the droplets of different…
When processing dense emulsions, complex flows stretch and deform droplets to the point of breakup, changing the droplet size distribution and the mechanical properties of the final product. For steady homogeneous flows, a droplet's shape…
Drying a droplet of colloidal dispersion can result in complex pattern formation due to both development and deformation of a skin at the drop surface. The present study focus on the drying process of droplets of colloidal dispersions in a…
Colloidosomes are created in the laboratory from a Pickering emulsion of water droplets in oil. The colloidosomes have approximately the same diameter and by choosing (hairy) particles of different diameters it is possible to control the…
This study investigates the hydrodynamics of droplet formation in a T-shaped cylindrical microfluidic device using micro-PIV experiments and CFD simulations. Devices of 150 micro-m internal diameter were fabricated from PDMS via a…
We study the size and shape of the final deposit obtained when a drop with colloidal particles has dried on a super-hydrophobic surface made of micro-posts. As expected, most of the particles lie inside a circular area, which radius roughly…
We studied the dependence of solid deposit shape obtained by free drying of sessile drops on the particles concentration and Derjaguin-Landau-Verwey-Overbeek (DLVO) particle/substrate interaction. In contrast to previous contributions using…
Evaporating suspensions of colloidal particles lead to the formation of a variety of patterns, ranging from a left-over ring of a dried coffee drop to uniformly distributed solid pigments left behind wet paint. To characterize the…
In this review, latest updates in the poly (ethylene oxide) based electrolytes are summarized. The ultimate goal of researchers globally is towards the development of free standing solid polymeric separator for energy storage devices. This…
The equilibrium properties of polymer droplets on a soft deformable surface are investigated by molecular dynamics simulations of a bead-spring model. The surface consists of a polymer brush with irreversibly end-tethered linear homopolymer…
Effects of substrate temperature, substrate wettability and particles concentration are experimentally investigated for evaporation of a sessile water droplet containing colloidal particles. Time-varying droplet shapes and temperature of…
An efficient way to precisely pattern particles on solid surfaces is to dispense and evaporate colloidal drops, as for bioassays. The dried deposits often exhibit complex structures exemplified by the coffee ring pattern, where most…
We explore the influence of particle shape on the behavior of evaporating drops. A first set of experiments discovered that particle shape modifies particle deposition after drying. For sessile drops, spheres are deposited in a ring-like…
The deformation and break-up of Newtonian/viscoelastic droplets are studied in confined shear flow. Our numerical approach is based on a combination of Lattice-Boltzmann models (LBM) and finite difference schemes, the former used to model…