相关论文: A contact model for the yielding of caked granular…
An improved linear model is developed for elasto-plastic and adhesive contact. New correlations are proposed and validated to estimate the key input parameters of the model, including contact stiffness, yield point, maximum pull-off force…
The mechanics of cohesive or cemented granular materials is complex, combining the heterogeneous responses of granular media, like force chains, with clearly defined material properties. Here, we use a discrete element model (DEM)…
In Part I of this two part series, we presented a multi-neighbor dependent contact model for adhesive elastic-plastic particles built upon the method of dimensionality reduction that is valid for the elastic and fully-plastic contact…
One of the major shortcomings of discrete element modelling (DEM) is the computational cost required when the number of particles is huge, especially for fine powders and/or industry scale simulations. This study investigates the scaling of…
This article presents a new force model for performing quantitative simulations of dense granular materials. Interactions between multiple contacts (MC) on the same grain are explicitly taken into account. Our readily applicable method…
Surface roughness is known to easily suppress the adhesion of elastic surfaces. Here a simple model for the contact of \emph{viscoelastic} rough surfaces with significant levels of adhesion is presented. This approach is derived from our…
For a wide range of applications, we need DEM simulations of granular matter in contact with flexible elastic boundaries. We present a novel method to describe the interaction between granular particles and a flexible elastic membrane.…
We performed dynamic pressure buckling experiments on defect-seeded spherical shells made of a common silicone elastomer. Unlike in quasi-static experiments, shells buckled at ostensibly subcritical pressures (i.e. below the…
Elastic properties and internal states of isotropic sphere packings are studied by numerical simulations. Several numerical protocols to assemble dense configurations are compared. One, which imitates experiments with lubricated contacts,…
The systematic errors due to the practical implementation of the Contact Dynamics method for simulation of dense granular media are examined. It is shown that, using the usual iterative solver to simulate a chain of rigid particles,…
A predicting model for soft Dielectric Elastomer Generators (DEGs) must consider a realistic model of the electromechanical behaviour of the elastomer filling, the variable capacitor and of the electrical circuit connecting all elements of…
We present a collision model for phase-resolved Direct Numerical Simulations of sediment transport that couple the fluid and particles by the Immersed Boundary Method. Typically, a contact model for these types of simulations comprises a…
The interaction between visco-elasto-plastic and adhesive particles is the subject of this study, where "meso-particles" are introduced, i.e., simplified particles, whose contact mechanics is not taken into account in all details. A few…
The simulation of industrial processes involving cold compaction of powders allows for the optimization of the production of both traditional and advanced ceramics. The capabilities of a constitutive model previously proposed by the authors…
In this paper, we consider a contact problem with adhesion between a viscoelastic body and a rigid support, taking thermal effects into account. The PDE system we deal with is derived within the modelling approach proposed by M. Fremond…
The paper addresses a common assumption of elastoplastic modeling: that the recoverable, elastic strain increment is unaffected by alterations of the elastic moduli that accompany loading. This assumption is found to be false for a granular…
A partially-wetting liquid can deform the underlying elastic substrate upon which it rests. This situation requires the development of theoretical models to describe the wetting forces imparted by the drop onto the solid substrate,…
The paper addresses the underlying source of two forms of induced anisotropy in granular materials: contact orientation anisotropy and contact force anisotropy. A rational, mathematical structure is reviewed for the manner in which fabric…
Colloidal dispersions are prized as model systems to understand basic properties of materials, and are central to a wide range of industries from cosmetics to foods to agrichemicals. Among the key developments in using colloids to address…
A flexible fiber model based on the discrete element method (DEM) is presented and validated for the simulation of uniaxial compression of flexible fibers in a cylindrical container. It is found that the contact force models in the DEM…