相关论文: The self-cohering tied-array

For a ground-based radio interferometer observing at low frequencies, the ionosphere causes propagation delays and refraction of cosmic radio waves which result in phase errors in the received signal. These phase errors can be corrected…

Connected radio interferometers are sometimes used in the tied-array mode: signals from antenna elements are coherently added and the sum signal applied to a VLBI backend or pulsar processing machine. Usually there is no computer-controlled…

A radio interferometer uses time delays to maximize its response to radiation coming from a particular direction. These time delays compensate for differences in the time of arrival of the wavefront at the different elements of the…

In radio astronomy, accurate calibration is of crucial importance for the new generation of radio interferometers. More specifically, because of the potential presence of outliers which affect the measured data, robustness needs to be…

The ionosphere is the main driver of a series of systematic effects that limit our ability to explore the low frequency (<1 GHz) sky with radio interferometers. Its effects become increasingly important towards lower frequencies and are…

Radio interferometers are phased arrays producing high-resolution images from the covariance matrix of measurements. Calibration of such instruments is necessary and is a critical task. This is how the estimation of instrumental errors is…

This paper investigates calibration of sensor arrays in the radio astronomy context. Current and future radio telescopes require computationally efficient algorithms to overcome the new technical challenges as large collecting area, wide…

Context. Multi-element phased-array radio telescopes use digital beamforming to widen their field-of-view with numerous tied-array beams (TABs). These beams share bandpass variations and radio frequency interference (RFI). Yet, most pulsar…

Instruments for radio astronomical observations have come a long way. While the first telescopes were based on very large dishes and 2-antenna interferometers, current instruments consist of dozens of steerable dishes, whereas future…

In radio astronomy, holography is a commonly used technique to create an image of the electric field distribution in the aperture of a dish antenna. The image is used to detect imperfections in the reflector surface. Similarly, holography…

Context: Low-frequency radio observations are heavily impacted by the ionosphere, where dispersive delays can outpace even instrumental clock offsets, posing a serious calibration challenge. Especially below 100 MHz, phase unwrapping…

Radio Interferometry is an essential method for astronomical observations. Self-calibration techniques have increased the quality of the radio astronomical observations (and hence the science) by orders of magnitude. Recently, there is a…

Interferometric calibration always yields non unique solutions. It is therefore essential to remove these ambiguities before the solutions could be used in any further modeling of the sky, the instrument or propagation effects such as the…

Direction dependent calibration of widefield radio interferometers estimates the systematic errors along multiple directions in the sky. This is necessary because with most systematic errors that are caused by effects such as the ionosphere…

Calibration is a key step in the signal processing pipeline of any radio astronomical instrument. The required sky, ionospheric and instrumental models for this step can suffer from various kinds of incompleteness. In this paper we analyze…

The visibilities measured by radio astronomical interferometers include non-astronomical correlated signals that arise from the local environment of the array. These correlated signals are especially important in compact arrays such as…

Using a thermal gas, we model the signal of a trapped interferometer. This interferometer uses two short laser pulses, separated by time T, which act as a phase grating for the matter waves. Near time 2T, there is an echo in the cloud's…

Interferometric measurements with arrays of radio antennas are a powerful and widely used technique in astronomy. Recently, this technique has been revisited for the reconstruction of extensive air showers [1]. This radio-interferometric…

Astronomical objects frequently exhibit structure over a wide range of scales whereas many telescopes, especially interferometer arrays, only sample a limited range of spatial scales. In order to properly image these objects, images from a…

Modern interferometers routinely provide radio-astronomical images down to subarcsecond resolution. However, interferometers filter out spatial scales larger than those sampled by the shortest baselines, which affects the measurement of…