相关论文: Source laser intense pour le refroidissement du 87…

We present a continuous-wave, 810 nm laser with watt-level powers. Our system is based on difference-frequency generation of 532 nm and 1550 nm fiber lasers in a single pass through periodically poled lithium niobate (PPLN). We measure the…

A modified Coherent 899-21 titanium sapphire laser is injection locked to produce 6-6.5 W of single-frequency light at 852 nm. After closed-loop amplitude control and frequency stabilization to a high-finesse cavity, it delivers 4-4.5 W…

We describe a simple and compact architecture for generating all optical frequencies required for the laser cooling, state preparation and detection of atoms in an ultracold rubidium-87 experiment from a single 780 nm laser source. In…

We report watt-level femtosecond pulses in the 1.75 $\mu$m region using a thulium-doped core, terbium-doped cladding fluoride (Tm:Tb:ZBLAN) fiber laser system. The seed pulse is generated through stimulated Raman scattering in a silica…

This paper reports the achievement of 120W single-frequency narrow linewidth 1018nm laser based on wide-tunable DBR fiber seed source. The DBR structure seed source uses 8mm long doped optical fibers with a line width of 3.25k. The…

We demonstrate the laser cooling of 85Rb atoms in a two-dimensional optical lattice. We follow the two-step degenerate Raman sideband cooling scheme [Kerman et al., Phys. Rev. Lett. 84, 439 (2000)], where a fast cooling of atoms to an…

Relativistic temperature electrons higher than 0.5 MeV are generated typically with laser intensities of about 10$^{18}$ W/cm$^{2}$. Their generation with high repetition rate lasers that operate at non-relativistic intensities…

A lightsail can be accelerated to ultra-high speed by the radiation pressure of a laser having an intensity of the order of GW/m$^2$, which though presents a critical challenge in the thermal management of lightsails. In this letter, we…

We present a laser frequency comb based upon a 250 MHz mode-locked erbium-doped fiber laser that spans more than 300 terahertz of bandwidth, from 660 nm to 2000 nm. The system generates 1.2 nJ, 70 fs pulses at 1050 nm by amplifying the 1580…

A source of ultrashort pulses of light in the 2 {\mu}m region was constructed using supercontinuum broadening from an erbium mode-locked laser. The output spectrum spanned 1000 nm to 2200 nm with an average power of 250 mW. A pulse width of…

We present on THz generation in the two-color gas plasma scheme driven by a high-power, ultrafast fiber laser system. The applied scheme is a promising approach for scaling the THz average power but it has been limited so far by the driving…

An ultrafast laser delivering 10.4 kW average output power based on coherent combination of twelve stepindex fiber amplifiers is presented. The system emits close-to-transform-limited 254 fs pulses at 80 MHz repetition rate, has a high beam…

We report on a high-power mid-infrared frequency comb source based on a femtosecond Er:fiber oscillator with a stabilized repetition rate at 250 MHz. The mid-infrared frequency comb is produced through difference frequency generation in a…

We present an optimized strategy for the production of tightly confined Bose-Einstein condensates (BEC) of 87Rb in a crossed dipole trap with direct loading from a magneto-optical trap. The dipole trap is created with light of a…

We report on an environmentally stable, Yb-doped, all-normal dispersion, mode-locked fibre laser that is capable of creating broadband pulses with ultra-low repetition rates. Specifically, through careful positioning of fibre sections in an…

We present an all-solid-state laser source emitting up to 2.1 W of single-frequency light at 671 nm developed for laser cooling of lithium atoms. It is based on a diode-pumped, neodymium-doped orthovanadate (Nd:YVO$_4$) ring laser operating…

We report on the observation of high efficiency frequency doubling of 1550 nm continuous-wave laser light in a nonlinear cavity containing a periodically poled potassium titanyl phosphate crystal (PPKTP). The fundamental field had a power…

Repetition-rate-scanned lasers are practical in accordion frequency comb generation that serves as a variable gearbox connecting optical and radio wave domains. Rapid and wide-range scanned repetition rate can benefit versatile purposes,…

Low noise and high repetition rate optical frequency combs are desirable for many applications from timekeeping to precision spectroscopy. For example, gigahertz repetition rate sources greatly increase the acquisition speed of spectra in a…

Ultra-stable, quasi-monochromatic laser light forms the basis for high-precision interferometric measurements, e.g. for observing gravitational waves and for time keeping with optical clocks. Optical frequency conversion enables access to…